Rental Services

Power Zone Equipment has a variety of industrial pump packages for rent. Using reciprocating pumps and centrifugal pumps, driven by electric motors or combustible engines, we are able to target a wide range of pumping applications. Our rental fleet covers a wide range of different flows and pressure applications. With many of our pump packages kept in stock and ready to be rented immediately, we can provide quick pumping solutions in a very short lead time.

Equipped mainly with mobile, diesel-driven pump packages, our rental fleet pumps are nimble enough to operate almost anywhere. From Mexico to within the Arctic Circle and everything in between, this rental service can provide you with temporary pumping solutions wherever you are.

Keeping our pump rental equipment well maintained and reliable is of utmost importance to us. Each rental pump package is serviced when it returns from a rental. Our testing department performs thorough inspections, maintenance and testing on each pump package before it leaves on another rental project.

Rental Pump

Since the addition of an in-house electrical engineering department, we have been adding additional safeties and controls to each rental pump package to enable better monitoring and data logging of our equipment. Utilizing an HMI and a PLC, and providing full sets of wiring schematics, manuals, and data sheets, we are able to increase reliability and make remote troubleshooting easier. If our equipment ever breaks down in the field, it is always our utmost priority to get it back up and running as soon as possible.

All rental pump packages are also for sale. "Rent-to-Purchase" options are also available if needed. In the event that a pump package is purchased, we replenish our rental fleet as soon as possible to keep the fleet complete and up-to-date. Often, we can custom design and build a pump package for a particular application and customer, even if the customer prefers only to rent the equipment instead of purchase capital equipment.

Our rental fleet is always changing. Be sure to view our current rental availability listed below. In many cases, plunger and impeller sizes, speeds and other variables can be adjusted to better fit your application. Talk to our knowledgeable sales team about your exact application and the pumps we have available to suit your need.

  • A wide variety of mobile pump packages for rent
  • Pump packages available for Rent, Purchase, or Rent-to-Purchase
  • Short term pump rental or long term pump rental options
  • Familiar with a wide range of industrial rental pump applications including:
    • Salt water disposal pump rentals
    • Pipeline pump rentals
    • Frac water supply pump rentals
    • Water transfer pump rentals
    • Well service pump rentals
  • International pump rental options available
  • Generators, VFDs and other supporting equipment available for rent
  • Rentals applicable for different industries including:
    • Oil and Gas
    • Mining
    • Refining
    • Disaster Relief and Flood Control
Rental Pump

Pump Packages for Rent

Title/Description HP RPM GPM PSI TDH KW
Used Sulzer Bingham 8x10x13A MSD Horizontal Multi-Stage Centrifugal Pump Package
Title
Used Sulzer Bingham 8x10x13A MSD Horizontal Multi-Stage Centrifugal Pump Package
HP
2800
RPM
3560
GPM
2875
PSI
 
TDH
3000
KW
 
Description
FOR SALE: 5-stage centrifugal pump with 2003, 2800hp, Caterpillar 3516B with 650hrs, water cooled radiator, (3) 150gal fuel tanks, Cotta G01900E 2:1 gear increaser, air clutch, 8" Turbin Flowmeter, 2psi sensors, (2) 25' 6" 600psi hoses, (3) 4" hoses, 4" check valve, 4" gate valve, ball dropper 7/8" balls, holds 2300, operation controlled from sleeper of 2003 Kenworth T800W with 370,000 miles, 550hp C15 Caterpillar engine, 18-speed manual transmission, 2-speed browning, jake brakes, 411 gears, 265" wheel base, 456 rears, double lockers, 3-axle 52' dropdeck trailer, air ride, front tandem sliders. Also available is an Ingersoll Rand 10LR-16A charge pump, single stage, 1/2" stainless steel discharge screen, (15) 20', 4" suction hoses, 28 suction ports, driven by a 500hp, 60 Series Detroit Diesel, 10-speed manual transmission, on a 1991 Kenworth W900 straight truck, 60 Series Detroit, 13-speed manual transmission. Also available with this lot are spare bearings and seals for the pump, spare seals for valves extra pressure sensors, cables and turbo for 3516 engine, suction fittings for the charge pump.
Used Sulzer Bingham 8x10x13A MSD Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Union 8x10 MRF 5/3 Stage Horizontal Multi-Stage Centrifugal Pump Package
Title
Rebuilt Union 8x10 MRF 5/3 Stage Horizontal Multi-Stage Centrifugal Pump Package
HP
2600
RPM
3400
GPM
4000
PSI
 
TDH
1750
KW
 
Description
Reconditioned Union Multistage (3) Centrifugal pump with 14.218" Impellers on skid with an EMD 16-645 Diesel Engine and Lufkin N1604C Gear Increaser, 3.977:1 Ratio, 1.87 Service Factor, 8" Suction 900# Flanges, 10" Discharge 900# Flanges
Rebuilt Union 8x10 MRF 5/3 Stage Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Oilwell B-558 Quintuplex Pump Package
Title
Used Oilwell B-558 Quintuplex Pump Package
HP
630
RPM
225
GPM
765
PSI
1270
TDH
 
KW
 
Description
FOR SALE OR RENT: Used 4 1/4 - 5 1/2 x 8 quintuplex pump, aluminum bronze fluid end with 5" ceramic plungers, 8" 300# ANSI flanged connection suction, 4" 900# ANSI flanged connection discharge, same as NOV 630Q-8L, 5.5" bore stuffing boxes and gland nuts, capable of 926 gpm @ 1050 psi with 5.5" plungers or 553 gpm @ 1765 psi with 4.25" plungers, on skid with Cat D-379 and Oilwell gear box
Used Oilwell B-558 Quintuplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
New Sulzer Bingham 6x8x12.5BX MSD Horizontal Multi-Stage Centrifugal Pump Package
Title
New Sulzer Bingham 6x8x12.5BX MSD Horizontal Multi-Stage Centrifugal Pump Package
HP
3000
RPM
3560
GPM
2222
PSI
 
TDH
3518
KW
 
Description
Unused Surplus Skid mounted 8 Stage centrifugal pump with S-6 material built for Lean Amine, 8" 1500# Suction Flange, 6" 1500 # Discharge Flange, Mechanical seals, c/w 3000 Hp Teco Westinghouse Electric Motor, Piping plan vent & drain, Lube oil supply & lube oil return
New Sulzer Bingham 6x8x12.5BX MSD Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt United 8BFH Horizontal Multi-Stage Centrifugal Pump Package
Title
Rebuilt United 8BFH Horizontal Multi-Stage Centrifugal Pump Package
HP
 
RPM
3550
GPM
2410
PSI
1015
TDH
2343
KW
 
Description
FOR SALE OR RENT: Rebuilt 4 stage horizontal split case centrifugal pump with 13” impellers, 10 inch ANSI 600# suction connection with suction Strainer and Mag flow meter with pressure gauges, 8 inch ANSI 600# discharge connection, packaged with good used MTU 12V-4000 diesel engine rated 1875 HP at 1900 RPM, with pneumatic clutch, and Cotta G01915E-1 gear increaser with 1.89:1 ratio. Package has PLC touch screen with engine controls integrated in same panel. The following transmitters send data to the PLC: flow meter rates, low suction pressure, high discharge pressure, pump bearing temperature, gear box oil temperature, gear box oil pressure, vibration, and all engine controls and ECM info is sent to engine control screen. Engine is mounted with vibration isolators and pump is hard mounted to help eliminate vibration and harmonic issues.
Rebuilt United 8BFH Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used United 6BFH Horizontal Multi-Stage Centrifugal Pump Package
Title
Used United 6BFH Horizontal Multi-Stage Centrifugal Pump Package
HP
 
RPM
3550
GPM
1770
PSI
780
TDH
1810
KW
 
Description
FOR SALE OR RENT: Used 4 stage horizontal split case centrifugal pump with 12" steel impellers, John Crane 8B1 mechanical seals, 8" 900LB suction, with basket strainer, 6" 900LB discharge, with MTU 12V-4000 diesel engine rated at 2250 HP @ 1900 RPM, Cotta GOR1915A-1, 1.88:1 gear increaser, discharge piping with flow meter, and skid mounted.
Used United 6BFH Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used National 543Q-7XL Quintuplex Pump Package
Title
Used National 543Q-7XL Quintuplex Pump Package
HP
543
RPM
280
GPM
1121
PSI
747
TDH
 
KW
 
Description
Used NOV 543Q-7XL quintuplex production pump package, last used in water pipeline service with the following features: • 7.125" stroke • Duplex Stainless Steel fluid end • 5.75” Tungsten Carbide plungers • Spherical valves • 10" ANSI 150# FF suction connection • 4" ANSI 600# FF discharge connection • Packaged on skid with Iveco C13 diesel engine rated 503 HP at 2100 rpm, and Rossi Motoriduttori 10.7:1 ratio gearbox • Weight: 22,700 lbs. • Dims (20'6"L x 8'3"W x 6'10" H)
Used National 543Q-7XL Quintuplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Oilwell A-348-5 Triplex Pump Package
Title
Rebuilt Oilwell A-348-5 Triplex Pump Package
HP
500
RPM
260
GPM
530
PSI
1455
TDH
 
KW
 
Description
FOR SALE OR RENT: REBUILT: Complete skid mounted 8" stroke triplex pump with aluminum bronze fluid end, 5" steel plungers, 6.86:1 rebuilt gear reducer, rebuilt John Deere 6125 diesel engine, Eaton transmission, new MCM series 250X hydraulic driven charge pump, Hydril discharge dampener, suction stabilizer, plunger lubricator with day tank, shear pin relief valve, fuel tank, and hydraulic tank. Package has engine controls and Siemens PLC, low oil transmitters, oil pressure transmitters, oil pressure gauges, low suction transmitter, high discharge transmitter, and fluid levels for all components.
Rebuilt Oilwell A-348-5 Triplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Union QX-300 Quintuplex Pump Package
Title
Used Union QX-300 Quintuplex Pump Package
HP
350
RPM
359
GPM
274
PSI
1980
TDH
 
KW
 
Description
FOR SALE OR RENT:Used Union QX-300 quintuplex production pump package with the following features: • 5" stroke • 350 HP • #3 steel fluid end • 3" steel plungers • 6" 150# suction connection • 3" 1500# discharge connection • Packaged on skid with 5.77:1 internal gears, capable of up to 274 gpm @ 1980 psi, 375 hp John Deere 6090H diesel engine, rebuilt manual transmission, new 3x4x13 hydraulic charge pump system. • Weight 21,080 lbs • Dims (20' 7" L x 7' 5"W x 9' H)
Used Union QX-300 Quintuplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Union TX-200 Triplex Pump Package
Title
Rebuilt Union TX-200 Triplex Pump Package
HP
200
RPM
369
GPM
142
PSI
2104
TDH
 
KW
 
Description
FOR SALE OR RENT: REBUILT: Skid mounted 5" stroke triplex pump with #3 steel billet fluid end, integral gears with 5.765:1 ratio, 2 3/4" steel plungers, 4" 150# RF suction, 3" 1500# RTJ discharge, driven by Caterpillar C7 diesel engine rated at 225 HP, rebuilt Eaton transmission, new MCM 3x4-13 hydraulic charge pump system, new suction strainer, new status flow discharge and suction dampeners, plunger lubricator, new shear pin relief valve, new pressure gauges, high discharge shutdown, low suction shutdown, low oil level switches, vibration switch, diesel fuel tank, hydraulic tank, and tool box.
Rebuilt Union TX-200 Triplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used National JWS-165-L Triplex Pump Package
Title
Used National JWS-165-L Triplex Pump Package
HP
165
RPM
400
GPM
413
PSI
1910
TDH
 
KW
 
Description
FOR SALE OR RENT: Low hour National JWS-165-L triplex production pump package with the following features: • 5" stroke • 165 HP • Steel fluid end • 4.5" pistons • suction connection • discharge connection • Packaged on skid with 225 hp John Deere diesel engine PE6068HF485Q, gearbox, rebuilt manual transmission, 3x4x13 hydraulic charge pump, on oilfield skid • Last used in geothermal application pumping water approx 8 hrs per day. • Weight 15,940 lbs • Dims (219”L x 89”W x 105” H)
Used National JWS-165-L Triplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Goulds 3415 Horizontal Single-Stage Centrifugal Pump Package
Title
Rebuilt Goulds 3415 Horizontal Single-Stage Centrifugal Pump Package
HP
800
RPM
1750
GPM
5700
PSI
194
TDH
450
KW
 
Description
FOR SALE OR RENT: REBUILT 10x12-22 BB1 single stage complete centrifugal pump, 12" suction, 10" discharge, 22 1/2" impeller. 5700 GPM, 450 tdh, 1750 rpm. Good used checked and tested Caterpillar D-349TA diesel engine. The pump is a ductile iron case and 22 ½” new stainless steel impeller. The pump shaft is stainless steel, the wear rings and sleeves are bronze. The mechanical seals are John Crane Type 8 single pusher component seal, carbon and tungsten carbide faces, viton elastomers, stainless steel metals. The hour meter on the engine reads 610.This unit is equipped with a PLC based monitoring and control center in a NEMA 4 enclosure. The enclosure is located adjacent to the engine throttle and the clutch lever for easy operation. The user interface is a seven inch touch screen located in the enclosure with the On / Off switch, a battery volt meter, and E-Stop switch. An ethernet switch is also included in the enclosure enabling connection to a network. The pump is fitted with sensors to monitor vibration, bearing oil temperatures, pump speed, suction pressure, and discharge pressure. The suction and discharge sensors have LED displays at the sensor location. Sensors on the engine monitor fuel pressure, coolant temperature, oil pressure, engine speed, and exhaust temperature. System operation outside of normal limits will produce alarm messages on the touch screen. Continued operation beyond preset trip points will trigger an engine shut down. An alarm message on the touch screen will indicate the cause of the shutdown.
Rebuilt Goulds 3415 Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Union TX-90 Triplex Pump Package
Title
Rebuilt Union TX-90 Triplex Pump Package
HP
90
RPM
411
GPM
138
PSI
1001
TDH
 
KW
 
Description
FOR SALE OR RENT: Rebuilt Union TX-90 triplex pump, #3 Monel fluid end with 2.875" plungers, disc valves, 8.33:1 internal gears, Cummins 6BT diesel engine, rebuilt Fuller Roadranger RTO11609A manual transmission, control panel, fuel tank, tool box, plunger lubricator, shear relief valve, pressure gauge, suction stabilizer, discharge dampener.
Rebuilt Union TX-90 Triplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Goulds 3335 Horizontal Multi-Stage Centrifugal Pump Package
Title
Rebuilt Goulds 3335 Horizontal Multi-Stage Centrifugal Pump Package
HP
 
RPM
3550
GPM
205
PSI
 
TDH
1098
KW
 
Description
FOR SALE OR RENT: REBUILT HDB-210, stainless steel, 10-stage multi-stage diffuser pump with 6.5" 316 stainless steel impellers, rebuilt 100hp Reliance electric motor, 3565rpm, 3 phase, 60hz, 460v, 110amps, 1.15 service factor, 405TS frame, P type, TEFC
Rebuilt Goulds 3335 Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used NLB 10250 Quintuplex Pump Package
Title
Used NLB 10250 Quintuplex Pump Package
HP
250
RPM
400
GPM
63
PSI
6000
TDH
 
KW
 
Description
FOR SALE OR RENT: Used NLB 10250 quintuplex production pump package with the following features: • 4.25" stroke • 250 HP • 410SS fluid end • 1.5" steel plungers • AR valves • 2.5" NPT suction connection • 1.5" NPT discharge connection • Packaged on skid with U.S. Electric 1782 RPM, 250 HP motor, with GT Poly Chain drive 4.68:1 ratio, Allen Bradley Soft Start with basic controls, plunger lubricator with day tank, low oil switch, vibration switch, low suction pressure switch, and high discharge pressure switch. • Weight • Dims
Used NLB 10250 Quintuplex Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Fairbanks Morse 8-2824AF Horizontal Single-Stage Centrifugal Pump Package
Title
Used Fairbanks Morse 8-2824AF Horizontal Single-Stage Centrifugal Pump Package
HP
 
RPM
2100
GPM
3000
PSI
144
TDH
334
KW
 
Description
Trailer mounted centrifugal fire pump, 10" suction, 8" discharge, with 482 hp Caterpillar (MFG 1993) 3406 DITA diesel power unit - stock #56272
Used Fairbanks Morse 8-2824AF Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Rebuilt Peerless 4AD18.5 Horizontal Single-Stage Centrifugal Pump Package
Title
Rebuilt Peerless 4AD18.5 Horizontal Single-Stage Centrifugal Pump Package
HP
 
RPM
1800
GPM
800
PSI
 
TDH
320
KW
 
Description
FOR SALE OR RENT: 4x6x18.5", S.O.# 3HD33015, Impeller Dia. 18.5", Impeller # 2669112, unitized with low hour John Deere 6068T diesel engine, 174hp @ 2500rpm., s/n TO6068T522638
Rebuilt Peerless 4AD18.5 Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Goulds 3330 Horizontal Multi-Stage Centrifugal Pump Package
Title
Used Goulds 3330 Horizontal Multi-Stage Centrifugal Pump Package
HP
 
RPM
2200
GPM
720
PSI
298
TDH
690
KW
 
Description
FOR SALE OR RENT: 5L 4-stage centrifugal pump, 5'' 300#discharge in front, 6'' 150# suction on back, packaged with Detroit 6-71
Used Goulds 3330 Horizontal Multi-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Fairbanks Morse 2824C Horizontal Single-Stage Centrifugal Pump Package
Title
Used Fairbanks Morse 2824C Horizontal Single-Stage Centrifugal Pump Package
HP
 
RPM
1770
GPM
2000
PSI
 
TDH
230
KW
 
Description
FOR SALE OR RENT: Low hour diesel Firetrol FTA-1100 fire pump system, 208hp Cummins 6BTA (MFG 2009) diesel engine, BB1 Fairbanks Morse 6x10 single stage pump, control panel, 10" suction, 6" discharge
Used Fairbanks Morse 2824C Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Fairbanks Morse 2824C Horizontal Single-Stage Centrifugal Pump Package
Title
Used Fairbanks Morse 2824C Horizontal Single-Stage Centrifugal Pump Package
HP
 
RPM
1770
GPM
2000
PSI
 
TDH
230
KW
 
Description
FOR SALE OR RENT: Low hour diesel engine fire pump, Firetrol FTA-1100, 208hp Cummins 6BTA diesel engine, BB1 Fairbanks Morse 6x10 single stage pump, control panel, 10" suction, 6" discharge
Used Fairbanks Morse 2824C Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Peerless 10AE20 Horizontal Single-Stage Centrifugal Pump Package
Title
Used Peerless 10AE20 Horizontal Single-Stage Centrifugal Pump Package
HP
 
RPM
1800
GPM
4200
PSI
 
TDH
260
KW
 
Description
FOR SALE OR RENT: Used on skid Peerless 10AE20 single stage centrifugal pump driven by good used Cummins 400 diesel engine, with Eaton manual transmission, Control panel
Used Peerless 10AE20 Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Berkeley B8GQBM Horizontal Single-Stage Centrifugal Pump Complete Pump
Title
Used Berkeley B8GQBM Horizontal Single-Stage Centrifugal Pump Complete Pump
HP
100
RPM
1770
GPM
3480
PSI
 
TDH
108
KW
 
Description
Used Berkeley B8GQBM single stage centrifugal pump, 10" suction, 8" discharge, clockwise rotation
Used Berkeley B8GQBM Horizontal Single-Stage Centrifugal Pump Complete Pump
Title/Description HP RPM GPM PSI TDH KW
Used Patterson 6X5 M Horizontal Single-Stage Centrifugal Pump Package
Title
Used Patterson 6X5 M Horizontal Single-Stage Centrifugal Pump Package
HP
 
RPM
1625
GPM
1100
PSI
 
TDH
155
KW
 
Description
FOR SALE OR RENT: Used BB1 single stage centrifugal fire pump with 15 7/8" bronze impeller, on skid with Detroit 3-71 diesel engine. Patterson is a subsidiary of Gorman Rupp, 6" suction, 5" discharge
Used Patterson 6X5 M Horizontal Single-Stage Centrifugal Pump Package
Title/Description HP RPM GPM PSI TDH KW
Used Onan 6.0DJB-3CR/13037AC Diesel Generator
Title
Used Onan 6.0DJB-3CR/13037AC Diesel Generator
HP
12
RPM
1800
GPM
 
PSI
 
TDH
 
KW
6
Description
OUT ON RENTAL; single phase 6 KW Diesel, Trailer mounted came with breaker box
Used Onan 6.0DJB-3CR/13037AC Diesel Generator
Title/Description HP RPM GPM PSI TDH KW
New Lube Power Inc Custom Package
Title
New Lube Power Inc Custom Package
HP
 
RPM
 
GPM
 
PSI
 
TDH
 
KW
 
Description
New custom lube skid for Sulzer pump and 3000 HP electric motor stock numbers 58688, and 58696.
New Lube Power Inc Custom Package
Title/Description HP RPM GPM PSI TDH KW
Used Yaskawa P1000 VFD
Title
Used Yaskawa P1000 VFD
HP
500
RPM
 
GPM
 
PSI
 
TDH
 
KW
 
Description
FOR SALE OR RENT: Good used 590 Amp, 500hp VFD skid with 12 Pulse Input, Input Circuit Breaker, Phase Shifting Transformer. Ideal for running from a generator.
Used Yaskawa P1000 VFD
Title/Description HP RPM GPM PSI TDH KW
Used Byron Jackson 4x6x9D DVMX Horizontal Multi-Stage Centrifugal Pump Package
Title
Used Byron Jackson 4x6x9D DVMX Horizontal Multi-Stage Centrifugal Pump Package
HP
930
RPM
3570
GPM
930
PSI
1064
TDH
2459
KW
 
Description
Used Byron Jackson 4x6x9D DVMX, API 610, BB3 pump with the following features: • CA6NM case material (410 stainless steel) • 7 stage (first stage double suction) • 9.75” 13 chrome impellers (first stage single suction) • 6” 900# suction flange • 4” 900# discharge flange • Mechanical Seals with piping plan 31 • Sleeve radial bearing • Ball thrust bearing • CW Rotation • 410 stainless steel wear rings, case rings • 410 stainless shaft • Packaged on skid with 750 HP 4160v Teco Westinghouse motor. • Weight 13,980 lbs • Dims (178”L x 59”W x 79” H)
Used Byron Jackson 4x6x9D DVMX Horizontal Multi-Stage Centrifugal Pump Package