- {{tag.text}} ×
PLEASE NOTE: Keep an eye out for a verification email (check your junk or spam). When you see the email, be sure the click on the link to verify your email address.
Unused Surplus blower, Roots order# HA03453, tag# 208K-800, rated flow 42670acfm, max working temp 255F, max continuous 7651rpm, on skid with power oil lube system for all components with two 7.5hp motors and Lufkin speed increaser.
- 3000 HP
- 7651 RPM
- Stock No: 58387
Unused Surplus blower, Roots order# HA03453, tag# 208K-800, rated flow 42670acfm, max working temp 255F, max continuous 7651rpm, on skid with power oil lube system for all components with two 7.5hp motors and Lufkin speed increaser. 3000HP motor is still on the skid and available as a separate item
- 3000 HP
- 7651 RPM
- Stock No: 58413
700 RPM 15000 # rod load, 8-1/2" 770 PSI design cylinder serial number 139161 & 4-3/4" 1430 PSI design cylinder serial number 99624, air exchanger three stage cooler, model 72AEH, 300* @ 1300psi. The engine is not with this compresssor any longer.
- 700 RPM
- 770 PSI
- Stock No: 52477
Used 30"OD x 10' horizontal test separator, MAWP: 1200psi@200deg, NB: 6113. instr. Gas scrubber, 10 3/4"ODx4' S/S, MAWP: 125psi@130deg, serial number 9460. salt filter, 8 5/8" ODx3'5" LG S/E, MAWP: 125psi@130deg, serial number 9462. indirect heater, 30" ODx12' E/E, glycol capacity 360gal, 200,000btu, serial number 7235-10. flow coil, 4 pass, 2 1/2" XXH, MAWP: 5000psig, serial number 7297-4
- 1200 PSI
- Stock No: 55489
Used complete 2- stage gas compressor package, compressor cylinders are ORE, 11x14, 250, 400, 100psi max
- 160 HP
- 100 PSI
- Stock No: 54661
Used compressor has suction scrubber, with cooler, 2 stage, belt drive, 11" stroke, 600 psi suction 1500 psi discharge, built 1969
- 1500 PSI
- Stock No: 54306
Ingersoll Rand Comp. Inlet Scrubber Ace Cooler,Murphymatic contro panel, suction scrubber,stroke 5.0", Bore 7.0", RPM 550 Max rod load 10,000 PSI, max working pressure-1,050 PSI withCummins Engine; model G-495, has hole in the block, stock #54489 ,
- 550 RPM
- 1050 PSI
- Stock No: 54055
Used gas compressor on skid, bore 6.25", stroke 7.0" liner bore 5.5", suction scrubber serial number 71639, Air-x-Changer Inc. cooler serial number 712312
- 125 HP
- 1250 PSI
- Stock No: 54056
Used single stage compressor with 1200psi vessel, cooling fan, Waukesha 145-GK, on skid, power end cast # RLC1, cylinder cast # 13RXD2, 62565. Cylinder size 4.5"
- 145 HP
- 1200 PSI
- Stock No: 55599
5x11 HBGG, 1000 psi, with Waukesha 6WAK engine
- 1000 PSI
- Stock No: 51771
Used gas compressor on skid, Type YKJ, 1500 MWP, 6 x 8 Serial # on compressor side is 2685 Estimated weight 25,000 lbs Dims 241"Lx103"Wx118"H
- 60 HP
- 200-475 RPM
- 1500 PSI
- Stock No: 55053
Used compressor, powered with 3208 Caterpillar, complete unit - 3208 serial# 9WCO2517. 7.5 bar/110 psi. 360 l/s (762 cfm) free air delivery @ 3000 rpm. Parts list in e-file
- 250 HP
- 2600 RPM
- 110 PSI
- Stock No: 54133
Used hydraulic drive unit that was coupled to National JWS-165-L
- 165 HP
- 400 RPM
- Stock No: 57175
Gas compressor rated at 1000 PSI, with Altronic EPC-100 air fuel ratio controller, Murphy panel, on skid with Waukesha F1197 serial number 149148 Skid Dims 194"Lx102"Wx104"H
- 1000 PSI
- Stock No: 52386
Used cartridge filter max temp 250 F at 150 psi, max DP 150 psi at 250, refill# A-2063
- 150 PSI
- Stock No: 56890
Used hydraulic drive unit that was coupled to Gardner Denver TEE
- 165 HP
- 350 RPM
- Stock No: 57209
Good used industrial heat exchanger, 2 cooling fans powered by Lincoln electric motor
- 7.5 HP
- 3 Phase
- 230/460 Volts
- Stock No: 56073
Used gas compressor, 270.8 acfm, 9000rpm, 1015 psia inlet, 2281' head, 8" 300# suction and 6" 300# discharge, with 150hp, 460v motor Weight 3,340 lbs Dims 80"Lx35"Wx37"H
- 150 HP
- 9008 RPM
- 2219 TDH
- 460 Volts
- Stock No: 56680