Industrial Engine Driven Pumps For Sale | Power Zone
FOR SALE: Used Gaso 2652 duplex pump package with the following features: • 12" stroke • 250 HP • Steel fluid end • 6" steel pistons • 8" 300 lb suction connection • 4" 600 lb discharge connection • 5.05 gear ratio • Weight 23,540 lbs • Dims (18'6"L x 7'6"W x 6'5"H)
Applications: Mud Pump, Oil Transfer Pump, Oil & Gas Pipeline Pump, Production Pump
- 250 HP
- 85 RPM
- 472 GPM
- 780 PSI
- Ratio: 5.0500
- Stock No: 58552
Unused Surplus MCM 250 series 4x3x13 pump packaged with 225 HP Perkins diesel engine. Comes with hard iron fluid end which includes 11.5" impeller, casing with replaceable wear pad and stuffing box. Pump includes stainless steel shaft sleeve, premium bearings. Mounted on a fabricated oilfield base with belts and sheaves to operate pump at 3600 rpm, OSHA type belt guard and a Perkins 126F, 225 HP@2200 rpm, water cooled diesel engine. Unit includes 12 volt remote operated PTO clutch, 100 gallon in frame rails fuel tank and lines, spark arrester, battery and cables. Unit includes Murphy TEC10 instrument panel with electric key start, weatherproof enclosure, gauges and instrumentation including safety shut-off switches. Murphy TEC10 controller includes remote start/stop throttle control and PTO engagement and dis-engagement via Canbus controller with 40' cable. 600 gpm 225 HP 2200 rpm Weight 5,362 lbs Dims 109"Lx60"Wx80"H
Applications: Dewatering Pump, Slurry Pump, Pipeline Filling Pump, Water Transfer Pump, Paper Mill Pump, Oil Transfer Pump, Water Pipeline Pump, Engine Driven Pump, Charge Pump
- 225 HP
- 2200 RPM
- 600 GPM
- 600 TDH
- 12 Volts
- Stock No: 60441
LOW HOUR: Skid mounted 5" stroke triplex pump with #3 steel billet fluid end, integral gears with 5.765:1 ratio, 2 3/4" steel plungers, 4" 150# RF suction, 3" 1500# RTJ discharge, driven by Caterpillar C7 diesel engine rated at 225 HP, rebuilt Eaton transmission, new MCM 3x4-13 hydraulic charge pump system, new suction strainer, new status flow discharge and suction dampeners, plunger lubricator, new shear pin relief valve, new pressure gauges, high discharge shutdown, low suction shutdown, low oil level switches, vibration switch, diesel fuel tank, hydraulic tank, and tool box.
Applications: Well Service Pump, Water Transfer Pump, Engine Driven Pump, Production Pump
- 200 HP
- 369 RPM
- 142 GPM
- 2104 PSI
- Ratio: 5.7650
- Stock No: 57351
Used Peerless 10AE20, BB1 pump with the following features: • Ductile iron case material • Single stage • 17.125" impeller • 12" suction flange • 10" discharge flange • Packaged with Cummins 400 diesel engine, with Eaton manual transmission, Control panel • CW Rotation • Weight 12,200 lbs • Dims
Applications: Dewatering Pump, Water Wastewater Pump, Low NPSH Pump, Water Pipeline Pump, Engine Driven Pump, Charge Pump, Flood Water Control Pump
- 1800 RPM
- 4200 GPM
- 260 TDH
- Stock No: 57291
Low hour National JWS-165-L triplex well service pump package with the following features: • 5" stroke • 165 HP • Steel fluid end • 4.5" pistons • 6" 150 # suction connection • 2" 1500# discharge connection • Packaged on skid with 225 hp John Deere diesel engine PE6068HF485Q, gearbox, rebuilt manual transmission, 3x4x13 hydraulic charge pump, on oilfield skid • Last used in geothermal application pumping water approx 8 hrs per day. • Weight 15,940 lbs • Dims (219”L x 89”W x 105” H)
Applications: Well Service Pump, Water Transfer Pump, Engine Driven Pump, Production Pump
- 165 HP
- 400 RPM
- 413 GPM
- 1910 PSI
- Stock No: 56744
Rebuilt 6-stage API 610 high speed BB3 centrifugal pump for high pressure (2300 PSI) water injection. Pump has a CA6NM Stainless Steel case with 12 chrome impellers, wear rings, case rings, and shaft sleeves. Shaft is 4140 HT material. Radial bearings are sleeve and thrust bearings are Kingsbury. Pump suction size is 6" 300# and discharge is 4" 1500# RF connection. Packaged with Cat 3516 diesel engine and also GB Lufkin 2.745:1 ratio Estimated package weight 32,000 lbs Package dims 324"Lx100"Wx120"H
Applications: Saltwater Disposal Pump, Dewatering Pump, Boiler Feed Water Pump, Pressure Testing Pump, Water Transfer Pump, Frac Water Supply Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Engine Driven Pump
- 2000 HP
- 4950 RPM
- 1510 GPM
- 3980 TDH
- Stock No: 55450
Used Union TX-90 triplex pump, #3 Monel fluid end with 4" 150# FF suction, 2" NPT male discharge, 2.875" plungers, disc valves, 8.33:1 internal gears, Cummins 6BT diesel engine, used Fuller Roadranger RTO11609A manual transmission, control panel, fuel tank, tool box, plunger lubricator, shear relief valve, pressure gauge, suction stabilizer, discharge dampener. 10,700 lbs. 6'8" Wide, 15'8" Long and 8' 6" High
Applications: Saltwater Disposal Pump, Engine Driven Pump
- 90 HP
- 411 RPM
- 138 GPM
- 1001 PSI
- Ratio: 8.3300
- Stock No: 52203
