Pumps For Sale

10WIK16 4-stage API BB5 Centrifugal Barrel pump, 3236 RPM, 1834 GPM, 3445 TDH, .96 S.G, 16.25" Impeller Dia., Suction Flange Size OD 23" 12 holes bolt hole size 2" Flange thickness 5" Discharge OD 19 1/2 " 12 bolt holes bolt hole size 1 3/4" Flange thickness 4 1/2"

<

1 of 11

>

• 3085 HP
• 3236 RPM
• 1836 GPM
• 1451 PSI
• 3458 TDH
• Stock No: 58887

FOR SALE: 5-stage centrifugal pump with 2003, 2800hp, Caterpillar 3516B with 650hrs, water cooled radiator, (3) 150gal fuel tanks, Cotta G01900E 2:1 gear increaser, air clutch, 8" Turbin Flowmeter, 2psi sensors, (2) 25' 6" 600psi hoses, (3) 4" hoses, 4" check valve, 4" gate valve, ball dropper 7/8" balls, holds 2300, operation controlled from sleeper of 2003 Kenworth T800W with 370,000 miles, 550hp C15 Caterpillar engine, 18-speed manual transmission, 2-speed browning, jake brakes, 411 gears, 265" wheel base, 456 rears, double lockers, 3-axle 52' dropdeck trailer, air ride, front tandem sliders. Also available is an Ingersoll Rand 10LR-16A charge pump, single stage, 1/2" stainless steel discharge screen, (15) 20', 4" suction hoses, 28 suction ports, driven by a 500hp, 60 Series Detroit Diesel, 10-speed manual transmission, on a 1991 Kenworth W900 straight truck, 60 Series Detroit, 13-speed manual transmission. Also available with this lot are spare bearings and seals for the pump, spare seals for valves extra pressure sensors, cables and turbo for 3516 engine, suction fittings for the charge pump.

<

1 of 22

>

• 2800 HP
• 3560 RPM
• 2875 GPM
• 3000 TDH
• Stock No: 56753

Reconditioned Union Multistage (3) Centrifugal pump with 14.218" Impellers on skid with an EMD 16-645 Diesel Engine and Lufkin N1604C Gear Increaser, 3.977:1 Ratio, 1.87 Service Factor, 10" Suction 900# Flanges, 8" Discharge 900# Flanges

<

1 of 11

>

• 2600 HP
• 3560 RPM
• 4000 GPM
• 3800 TDH
• Stock No: 58690

Unused Flowserve 4WIK15-8, API 610, BB5 pump with the following features: • C-6 API Material Class • Barrel A266 Class 4 with 309L SS Lining • 8 stage • 15.2” CA6NM impellers • 8” 2500 suction flange • 6” 2500 discharge flange • Flowserve QBQ/GSLW API 682 Mechanical Seals with flush plan 23 and 66B • Sleeve Tri Lobe radial bearing • Tilt Pad 8” Leg Kingsbury thrust bearing • CCW Rotation • Integral wear rings • A276 tp 440a case rings • A276 tp 440a shaft • Pump was originally built for severe remote service produced water application, would be an excellent pump for SWD in the oilfield. • Weight • Dims

<

1 of 18

>

• 3000 HP
• 3570 RPM
• 990 GPM
• 6838 TDH
• Stock No: 59076

New Unused Surplus SPX Main Feedwater Pump 3580 RPM, 9600 GPM, 1019/1319 PSI, Suction 730 PSI, Discharge 1838 PSI, CW Rotation, FK 14/18 Type

<

1 of 11

>

• 3580 RPM
• 9600 GPM
• 1319 PSI
• 1950 TDH
• Stock No: 59088

FOR SALE OR RENT: Used 4 1/4 - 5 1/2 x 8 quintuplex pump, aluminum bronze fluid end with 5" ceramic plungers, 8" 300# ANSI flanged connection suction, 4" 900# ANSI flanged connection discharge, same as NOV 630Q-8L, capable of 926 gpm @ 1050 psi with 5.5" plungers or 553 gpm @ 1765 psi with 4.25" plungers, on skid with Cat D-379 and Oilwell gear box

<

1 of 34

>

• 630 HP
• 225 RPM
• 765 GPM
• 1270 PSI
• Stock No: 58246

Unused Sulzer 6x8x13.5 MSD, API 610, BB3 pump with the following features: • D-1 case material (duplex stainless steel) • 9 stage (first stage single suction) • 13.5” duplex stainless impellers (first stage single suction) • 8” ANSI 1500# RTJ suction flange • 6” ANSI 1500# RTJ discharge flange • John Crane FFST Mechanical Seals with piping plan 31 • Sleeve radial bearing • Pivot shoe thrust bearing • CCW Rotation • Duplex stainless steel wear rings, case rings • Duplex stainless shaft • Pump was originally built for seawater and produced water applications, would be an excellent pump for SWD in the oilfield and also high pressure boiler feed applications. • Weight • Dims

<

1 of 17

>

• 3175 HP
• 3580 RPM
• 1500 GPM
• 6315 TDH
• Stock No: 58680

Unused Sulzer 6x8x13.5 MSD, API 610, BB3 pump with the following features: • D-1 case material (duplex stainless steel) • 9 stage (first stage single suction) • 13.5” duplex stainless impellers (first stage single suction) • 8” ANSI 1500# RTJ suction flange • 6” ANSI 1500# RTJ discharge flange • John Crane FFST Mechanical Seals with piping plan 31 • Sleeve radial bearing • Pivot shoe thrust bearing • CCW Rotation • Duplex stainless steel wear rings, case rings • Duplex stainless shaft • Pump was originally built for seawater and produced water applications, would be an excellent pump for SWD in the oilfield and also high pressure boiler feed applications. • Weight • Dims

<

1 of 15

>

• 3175 HP
• 3580 RPM
• 1500 GPM
• 6315 TDH
• Stock No: 58681

FOR SALE OR RENT: Rebuilt 4 stage horizontal split case centrifugal pump with 13” impellers, 10 inch ANSI 600# suction connection with suction Strainer and Mag flow meter with pressure gauges, 8 inch ANSI 600# discharge connection, packaged with good used MTU 12V-4000 diesel engine rated 1875 HP at 1900 RPM, with pneumatic clutch, and Cotta G01915E-1 gear increaser with 1.89:1 ratio. Package has PLC touch screen with engine controls integrated into the same panel. The following transmitters send data to the PLC: flow meter rates, low suction pressure, high discharge pressure, pump bearing temperature, gear box oil temperature, gear box oil pressure, vibration, and all engine controls and ECM info is sent to engine control screen. Engine is mounted with vibration isolators and pump is hard mounted to help eliminate vibration and harmonic issues.

<

1 of 15

>

• 3550 RPM
• 2410 GPM
• 1015 PSI
• 2343 TDH
• Stock No: 57293

FOR SALE OR RENT: Used: Complete skid mounted 8" stroke triplex pump with aluminum bronze fluid end, 5" steel plungers, 6.86:1 gear reducer, John Deere 6125 diesel engine, Eaton transmission, MCM series 250X hydraulic driven charge pump, Hydril discharge dampener, suction stabilizer, plunger lubricator with day tank, shear pin relief valve, fuel tank, and hydraulic tank. Package has engine controls and Siemens PLC, low oil transmitters, oil pressure transmitters, oil pressure gauges, low suction transmitter, high discharge transmitter, and fluid levels for all components. Weight is 28,480 lbs and is 249" long x 116" wide x 112" high.

<

1 of 16

>

• 500 HP
• 260 RPM
• 530 GPM
• 1455 PSI
• Ratio: 6.8600
• Stock No: 58291

FOR SALE OR RENT: Used 4 stage horizontal split case centrifugal pump with 12" steel impellers, John Crane 8B1 mechanical seals, 8" 900LB suction, with basket strainer, 6" 900LB discharge, with MTU 12V-4000 diesel engine rated at 2250 HP @ 1900 RPM, Cotta GOR1915A-1, 1.88:1 gear increaser, discharge piping with flow meter, and skid mounted.

<

1 of 13

>

• 3550 RPM
• 1770 GPM
• 780 PSI
• 1810 TDH
• Stock No: 57295

FOR SALE OR RENT: Unused Ingersoll Rand 3 WIK, API 610, BB5 centrifugal pump with the following features: • 309 SS Case Lining • 8 stage • impellers • 4” 1500# suction flange • 3” 1500# discharge flange • Mechanical Seals • Sleeve radial bearing • Kingsbury thrust bearing • CCW Rotation • Packaged on skid with Philadelphia 8HAS 2.093:1 gearbox, Requires 450 HP motor • Pump was originally built for Ethylene pipeline service. • Weight 15,700 lbs • Dims 290" L 60" W 60" H

<

1 of 9

>

• 7325 RPM
• 208 GPM
• 3940 PSI
• 8955 TDH
• Stock No: 59393

Used Ingersoll Rand 6x13DAH8 centrifugal pump with the following features: • CA6NM case material • 8 stage (first stage single suction) • 13.88” duplex stainless impellers • 8” 900# RF suction flange • 6”1500# RF discharge flange • Mechanical Seals • CCW Rotation • Pump was originally built for boiler feed applications • Weight 7,820 lbs. • Dims (119"L x 44"W x 57"H)

<

1 of 18

>

• 3560 RPM
• 2560 GPM
• 128 PSI
• 5800 TDH
• Stock No: 59487

Used Ingersoll Rand 6x13DAH8 centrifugal pump with the following features: • CA6NM case material • 8 stage (first stage single suction) • 13.88” duplex stainless impellers • 8” 900# RF suction flange • 6”1500# RF discharge flange • Mechanical Seals • Sleeve radial bearing • Sleeve Kingsbury thrust bearing • CCW Rotation • Pump was originally built for boiler feed applications • Weight 7,820 lbs. • Dims (119"L x 44"W x 57"H)

<

1 of 9

>

• 3560 RPM
• 2560 GPM
• 5800 TDH
• Stock No: 59488

Used Ingersoll Rand 6x13DAH8 centrifugal pump with the following features: • CA6NM case material • 8 stage (first stage single suction) • 13.88” duplex stainless impellers • 8” 900# RF suction flange • 6”1500# RF discharge flange • Mechanical Seals • Sleeve radial bearing • Sleeve Kingsbury thrust bearing • CCW Rotation • Pump was originally built for boiler feed applications • Weight 7,820 lbs. • Dims (119"L x 44"W x 57"H)

<

1 of 10

>

• 3560 RPM
• 2560 GPM
• 2510 PSI
• 5800 TDH
• Stock No: 59489

Used 14 stage 316 Stainless Steel centrifugal pump, 6" 600# RF suction, 3" 1500# RF discharge, capable of 600gpm @ 4620tdh @ 3480rpm, 3600 Hydro, SP GR .97, Brg#SKF-6213/7311 Spare rotating element not included, but available, with 9 1/2" stainless impellers.

<

1 of 67

>

• 3480 RPM
• 600 GPM
• 4620 TDH
• Stock No: 56663

Unused BB1 Flowserve 6UZDL25 multi stage centrifugal pump with 600# suction and discharge flanges

<

1 of 18

>

• 1000 HP
• 1783 RPM
• 2880 GPM
• 946 TDH
• Stock No: 58658

Unused BB1 Flowserve 6UZDL25 multi stage centrifugal pump with 600# suction and discharge flanges

<

1 of 16

>

• 1000 HP
• 1783 RPM
• 2880 GPM
• 946 TDH
• Stock No: 58659