- {{tag.text}} ×
PLEASE NOTE: Keep an eye out for a verification email (check your junk or spam). When you see the email, be sure the click on the link to verify your email address.
8WIK16 4-stage API BB5 Centrifugal Barrel pump, 3236 RPM, 1834 GPM, 3445 TDH, .96 S.G, 16.25" Impeller Dia., Suction Flange Size OD 23" 12 holes bolt hole size 2" Flange thickness 5" Discharge OD 19 1/2 " 12 bolt holes bolt hole size 1 3/4" Flange thickness 4 1/2"
Applications: Saltwater Disposal Pump
- 3085 HP
- 3236 RPM
- 1836 GPM
- 1451 PSI
- 3458 TDH
- Stock No: 58887
FOR SALE: 5-stage centrifugal pump with 2003, 2800hp, Caterpillar 3516B with 650hrs, water cooled radiator, (3) 150gal fuel tanks, Cotta G01900E 2:1 gear increaser, air clutch, 8" Turbin Flowmeter, 2psi sensors, (2) 25' 6" 600psi hoses, (3) 4" hoses, 4" check valve, 4" gate valve, ball dropper 7/8" balls, holds 2300, operation controlled from sleeper of 2003 Kenworth T800W with 370,000 miles, 550hp C15 Caterpillar engine, 18-speed manual transmission, 2-speed browning, jake brakes, 411 gears, 265" wheel base, 456 rears, double lockers, 3-axle 52' dropdeck trailer, air ride, front tandem sliders. Also available is an Ingersoll Rand 10LR-16A charge pump, single stage, 1/2" stainless steel discharge screen, (15) 20', 4" suction hoses, 28 suction ports, driven by a 500hp, 60 Series Detroit Diesel, 10-speed manual transmission, on a 1991 Kenworth W900 straight truck, 60 Series Detroit, 13-speed manual transmission. Also available with this lot are spare bearings and seals for the pump, spare seals for valves extra pressure sensors, cables and turbo for 3516 engine, suction fittings for the charge pump.
- 2800 HP
- 3560 RPM
- 2875 GPM
- 3000 TDH
- Stock No: 56753
Rebuilt Union 8x10 MRF 5/3, API 610, BB3 pump with the following features: • CF8M SS case material • 3 stage • 14.218" impellers • 10" 900# suction flange • 8" 1500# discharge flange • CCW Rotation • Weight 85,000 lbs • Dims 41'Lx8'Wx11' (13'7" w/exhaust)
- 3560 RPM
- 4711 GPM
- 1782 TDH
- Stock No: 58690
Unused Surplus Electric Machinery 3000 HP electric motor with following features: • 360 RPM • 4000 Volts • 335 Amps • 3 Phase • 60 Hz • 1.0 Service Factor • WP II Enclosure • 20U7220 Frame • Weight • Dims
- 3000 HP
- 360 RPM
- 3 Phase
- 4000 Volts
- Frame Type: 20U7220
- Stock No: 55827
Unused Surplus Electric Machinery 3000 HP electric motor with following features: • 360 RPM • 4000 Volts • 335 Amps • 3 Phase • 60 Hz • 1.0 Service Factor • WP II Enclosure • 20U7220 Frame • Weight • Dims
- 3000 HP
- 360 RPM
- 3 Phase
- 4000 Volts
- Frame Type: 20U7220
- Stock No: 55828
Unused Flowserve 4WIK15-8, API 610, BB5 pump with the following features: • C-6 API Material Class • Barrel A266 Class 4 with 309L SS Lining • 8 stage • 15.2” CA6NM impellers • 8” 2500 suction flange • 6” 2500 discharge flange • Flowserve QBQ/GSLW API 682 Mechanical Seals with flush plan 23 and 66B • Sleeve Tri Lobe radial bearing • Tilt Pad 8” Leg Kingsbury thrust bearing • CCW Rotation • Integral wear rings • A276 tp 440a case rings • A276 tp 440a shaft • Pump was originally built for severe remote service produced water application, would be an excellent pump for SWD in the oilfield. • Pump Weight 12,026 lbs • Skid Weight 89,750 lbs • Skid Dims 30'Lx9'3"Wx14'9"H
Applications: Saltwater Disposal Pump, Boiler Feedwater Pump, Multiphase Pump
- 3000 HP
- 3570 RPM
- 990 GPM
- 6838 TDH
- Stock No: 59076
Used Allen Bradley/ Rockwell 6300 VAC 0‐67 Hz 932 F.L.A. 13,400 HP VFD PowerFlex 7000 VFD 6 Pulse drive
- 13400 HP
- RPM
- 3 Phase
- 6600 Volts
- Stock No: 59077
Unused Surplus SPX Clyde Union FK14/18, API 610, OH2 pump with the following features: • Case material • Single stage • impeller • suction flange • discharge flange • CW Rotation • Weight 8,500 lbs • Dims 104"Lx104"Wx98"H
- 3580 RPM
- 9600 GPM
- 1319 PSI
- 1950 TDH
- Stock No: 59088
FOR SALE OR RENT: Used 4 1/4 - 5 1/2 x 8 quintuplex pump, aluminum bronze fluid end with 5" ceramic plungers, 8" 300# ANSI flanged connection suction, 4" 900# ANSI flanged connection discharge, same as NOV 630Q-8L, capable of 926 gpm @ 1050 psi with 5.5" plungers or 553 gpm @ 1765 psi with 4.25" plungers, on skid with Cat D-379 and Oilwell gear box
- 630 HP
- 225 RPM
- 765 GPM
- 1270 PSI
- Stock No: 58246
Unused Surplus blower, Roots order# HA03453, tag# 208K-800, rated flow 42670acfm, max working temp 255F, max continuous 7651rpm, on skid with power oil lube system for all components with two 7.5hp motors and Lufkin speed increaser.
- 3000 HP
- 7651 RPM
- Stock No: 58387
Unused Surplus blower, Roots order# HA03453, tag# 208K-800, rated flow 42670acfm, max working temp 255F, max continuous 7651rpm, on skid with power oil lube system for all components with two 7.5hp motors and Lufkin speed increaser. 3000HP motor is still on the skid and available as a separate item
- 3000 HP
- 7651 RPM
- Stock No: 58413
Unused Sulzer 6x8x13.5 MSD, API 610, BB3 pump with the following features: • D-1 case material (duplex stainless steel) • 9 stage (first stage single suction) • 13.5” duplex stainless impellers (first stage single suction) • 8” ANSI 1500# RTJ suction flange • 6” ANSI 1500# RTJ discharge flange • John Crane FFST Mechanical Seals with piping plan 31 • Sleeve radial bearing • Pivot shoe thrust bearing • CCW Rotation • Duplex stainless steel wear rings, case rings • Duplex stainless shaft • Pump was originally built for seawater and produced water applications, would be an excellent pump for SWD in the oilfield and also high pressure boiler feed applications. • Weight • Dims
Applications: Saltwater Disposal Pump, Boiler Feedwater Pump, Frac Water Supply Pump
- 3175 HP
- 3580 RPM
- 1500 GPM
- 6315 TDH
- Stock No: 58680
Unused Sulzer 6x8x13.5 MSD, API 610, BB3 pump with the following features: • D-1 case material (duplex stainless steel) • 9 stage (first stage single suction) • 13.5” duplex stainless impellers (first stage single suction) • 8” ANSI 1500# RTJ suction flange • 6” ANSI 1500# RTJ discharge flange • John Crane FFST Mechanical Seals with piping plan 31 • Sleeve radial bearing • Pivot shoe thrust bearing • CCW Rotation • Duplex stainless steel wear rings, case rings • Duplex stainless shaft • Pump was originally built for seawater and produced water applications, would be an excellent pump for SWD in the oilfield and also high pressure boiler feed applications. • Weight • Dims
Applications: Saltwater Disposal Pump, Boiler Feedwater Pump, Frac Water Supply Pump
- 3175 HP
- 3580 RPM
- 1500 GPM
- 6315 TDH
- Stock No: 58681
Rebuilt Caterpillar 3612 diesel engine with following features: • 4720 HP • 900 RPM • V12 Cylinder, 4 stroke • 280.0 mm (11 in) Bore • 300.0 mm (11.8 in) Stroke • 221.7 L (13527 in3) Displacement • Turbocharged (air to air aftercooled) Aspiration • CCW Rotation (from flywheel end) • Flywheel housing • Electric starting system • Weight 55,300 lbs (dry weight, engine only) • Dims (180”L x 67”W x 127” H)
- 4720 HP
- 900 RPM
- Stock No: 58262
FOR SALE OR RENT: Rebuilt United 8 BFH 4 stage horizontal split case centrifugal pump with 13” impellers, 10” ANSI 600# suction connection with flow meter, 8” 600# discharge connection, packaged with good used MTU 12V-4000 diesel engine rated 2000 HP at 1900 RPM, with Cotta G01915A-1 gear increaser with 1.89:1 ratio, Flowmeter, and Siemens touchscreen PLC with engine controls and the following transmitters that send data to the PLC: flow meter rates, low suction pressure, high discharge pressure, pump bearing temperature, gear box oil temperature, gear box oil pressure, vibration, and all engine controls and ECM info is sent to engine control screen. Engine is mounted with vibration isolators and pump is hard mounted to help eliminate vibration and harmonic issues., Pump details as follows: United 8 BFH, API 610, BB3 4 stage centrifugal pump with the following features: • Carbon steel case • 4 stage • 10” 600# suction flange • 8” 600# discharge flange • 13” 316 SS impellers • SS Wear rings • SS Shaft • SS case rings • Packing (no mechanical seal) • Sleeve radial bearing • Ball thrust bearing
- 3550 RPM
- 2410 GPM
- 1015 PSI
- 2343 TDH
- Stock No: 57293
FOR SALE OR RENT: Used: Complete skid mounted 8" stroke triplex pump with aluminum bronze fluid end, 5" steel plungers, 6.86:1 gear reducer, John Deere 6125 diesel engine, Eaton transmission, MCM series 250X hydraulic driven charge pump, Hydril discharge dampener, suction stabilizer, plunger lubricator with day tank, shear pin relief valve, fuel tank, and hydraulic tank. Package has engine controls and Siemens PLC, low oil transmitters, oil pressure transmitters, oil pressure gauges, low suction transmitter, high discharge transmitter, and fluid levels for all components. Weight is 28,480 lbs and is 249" long x 116" wide x 112" high.
- 500 HP
- 260 RPM
- 530 GPM
- 1455 PSI
- Ratio: 6.8600
- Stock No: 58291
FOR SALE OR RENT: Rebuilt United 6 BFH 4 stage horizontal split case centrifugal pump with 12.165” impellers, 8” 600# suction connection with flow meter, 6” 600# discharge connection, packaged with good used MTU 12V-4000 diesel engine rated 2250 HP at 1900 RPM, with Cotta G01915A-1 gear increaser with 1.89:1 ratio. Pump details as follows: United 6 BFH, API 610, BB3 4 stage centrifugal pump with the following features: • Carbon steel case • 4 stage • 8” 600# suction flange • 6” 600# discharge flange • 12.165” 316 SS impellers • 316 SS Wear rings • 416 SS Shaft • 410 SS case rings • Eye rings, hub rings, center and throttle bushings Boulden B-1050 (similar to vespel) • John Crane 8B1 mechanical seals • Seal plan 11 • Sleeve radial bearing • Ball thrust bearing • CCW Rotation looking at drive end
- 3550 RPM
- 2000 GPM
- 975 PSI
- 2250 TDH
- Stock No: 57295
FOR SALE OR RENT: Unused Ingersoll Rand 3 WIK, API 610, BB5 centrifugal pump with the following features: • 309 SS Case Lining • 8 stage • impellers • 4” 1500# suction flange • 3” 1500# discharge flange • Mechanical Seals • Sleeve radial bearing • Kingsbury thrust bearing • CCW Rotation • Packaged on skid with Philadelphia 8HAS 2.093:1 gearbox, Requires 450 HP motor • Pump was originally built for Ethylene pipeline service. • Weight 15,700 lbs • Dims 290" L 60" W 60" H
Applications: Boiler Feedwater Pump, Multiphase Pump, Refinery Pump
- 7325 RPM
- 208 GPM
- 3940 PSI
- 8955 TDH
- Stock No: 59393
Year: 1985; Compressor: 1250 cfm x 150 psi; Mud Pump: 510-P Oillwell mud pump; trailer mounted; Tools/Other Options: pipe loading arm, 3,000' of 4 1/2" Ingersoll Rand drill rods (30' joints), pipe trailer, hydraulic pipe racks, dog house with 1250 gal fuel tank on front, 80,000 pull back.
- 150 PSI
- Stock No: 54790
Used Waukesha 12V-AT27GL Natural Gas engine with following features: • 3130 HP • 1000 RPM • V-12 Cylinder, 4 stroke • 275 mm (10.827 in) Bore • 300 mm (11.811 in) Stroke • 213.9 L (13048 in3) Displacement • Turbocharged (air to air aftercooled) Aspiration • CCW Rotation (from flywheel end) • Pneumatic starting system • Weight 46,000 lbs (dry weight, engine only) • Dims
- 3130 HP
- 1000 RPM
- Ratio: 9.0000
- Stock No: 56802