Industrial Centrifugal Pumps For Sale | Power Zone
1300 TDH
Unused Surplus MCM 250 series 4x3x13 pump packaged with 225 HP Perkins diesel engine. Comes with hard iron fluid end which includes 11.5" impeller, casing with replaceable wear pad and stuffing box. Pump includes stainless steel shaft sleeve, premium bearings. Mounted on a fabricated oilfield base with belts and sheaves to operate pump at 3600 rpm, OSHA type belt guard and a Perkins 126F, 225 HP@2200 rpm, water cooled diesel engine. Unit includes 12 volt remote operated PTO clutch, 100 gallon in frame rails fuel tank and lines, spark arrester, battery and cables. Unit includes Murphy TEC10 instrument panel with electric key start, weatherproof enclosure, gauges and instrumentation including safety shut-off switches. Murphy TEC10 controller includes remote start/stop throttle control and PTO engagement and dis-engagement via Canbus controller with 40' cable. 600 gpm 225 HP 2200 rpm Weight 5,362 lbs Dims 109"Lx60"Wx80"H
Applications: Dewatering Pump, Slurry Pump, Pipeline Filling Pump, Water Transfer Pump, Paper Mill Pump, Oil Transfer Pump, Water Pipeline Pump, Engine Driven Pump, Charge Pump
- 225 HP
- 2200 RPM
- 600 GPM
- 600 TDH
- 12 Volts
- Stock No: 60441
Unused Spare 3 Stage Rotating Element: including Unused Spare Shaft • Impeller Size on Rotating Element: 11" • Dims of Rotating Element Only: ( 70" L x 11" W x 11" H ) • Dims of Shaft Only: (74" L x 4" W x 3.5" H )
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 1750 GPM
- 1220 TDH
- Stock No: 60196
Used Sulzer Bingham 8x10x13A MSD, API 610, BB3 pump with the following features: • Cat steel case material • 3 stage • 10” ANSI 600# RTJ suction flange • 8” ANSI 600# RTJ discharge flange • CCW Rotation • Weight 4,750 lbs • Dims 65"Lx39"Wx50"H
Applications: Dewatering Pump, CO2 Pipeline Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 3560 RPM
- 4100 GPM
- 1240 TDH
- Stock No: 60168
Used Union 6x6x10 VHK Centrifugal pump with the following features: • Duplex SS case material • Single stage • impeller • 6" suction flange • 6" discharge flange • Weight • Dims
Applications: Dewatering Pump, Water Pipeline Pump, Charge Pump
- 3600 RPM
- 6000 GPM
- 1310 TDH
- Stock No: 59889
Used Union 6x6x10 VHK Centrifugal pump with the following features: • Duplex SS case material • Single stage • impeller • 6" suction flange • 6" discharge flange • Weight • Dims
Applications: Dewatering Pump, Water Pipeline Pump, Charge Pump
- 3600 RPM
- 6000 GPM
- 1310 TDH
- Stock No: 59888
Used Union 6x6x10 VHK Centrifugal pump with the following features: • Duplex SS case material • Single stage • impeller • 6" suction flange • 6" discharge flange • Weight • Dims
Applications: Dewatering Pump, Water Pipeline Pump, Charge Pump
- 3600 RPM
- 6000 GPM
- 1310 TDH
- Stock No: 59887
Used Sulzer Bingham 14x14x19 HSB, API 610, BB1 pump with the following features: • Steel case material • 1-stage • Double suction • 14” 900# suction flange • 14” 900# discharge flange • Mechanical Seals • CCW Rotation • Weight 6,800 lbs • Dims (59” L x 73” W x 53” H)
Applications: Dewatering Pump, Low NPSH Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 3560 RPM
- 7000 GPM
- 1300 TDH
- Stock No: 59714
Used Sulzer Bingham 14x14x19 HSB, API 610, BB1 pump with the following features: • Steel case material • 1-stage • Double suction • 14” 900# suction flange • 14” 900# discharge flange • Mechanical Seals • CCW Rotation • Weight 6,800 lbs • Dims (59” L x 73” W x 53” H)
Applications: Dewatering Pump, Low NPSH Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 3560 RPM
- 7000 GPM
- 1300 TDH
- Stock No: 59713
Used Sulzer Bingham 14x14x19 HSB, API 610, BB1 pump with the following features: • Steel case material • 1-stage • Double suction • 14” 900# suction flange • 14” 900# discharge flange • Mechanical Seals • CCW Rotation • Weight 6,800 lbs • Dims (59” L x 73” W x 53” H)
Applications: Dewatering Pump, Low NPSH Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 3560 RPM
- 7000 GPM
- 1300 TDH
- Stock No: 59712
Used Warren 1.5 TM-6, API 610, BB3 pump with the following features: • 5 CR case material • 6-stage (first stage single suction) • impellers (first stage single suction) • 3” ANSI 600# FF suction flange • 1.5” ANSI 600# FF discharge flange • Mechanical Seals • CCW Rotation • Weight 1,360 lbs • Dims (64” L x 26” W x 31” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Oil Transfer Pump, Oil & Gas Pipeline Pump, Production Pump
- 3550 RPM
- 65 GPM
- 1400 TDH
- Stock No: 59628
Used Sulzer Bingham 1.5 TM-6, API 610, BB3 pump with the following features: • 5 CR case material • 6-stage (first stage single suction) • impellers (first stage single suction) • 3” ANSI 600# FF suction flange • 1.5” ANSI 600# FF discharge flange • Mechanical Seals • CCW Rotation • Weight 1,360 lbs • Dims (64” L x 26” W x 31” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Oil Transfer Pump, Oil & Gas Pipeline Pump, Production Pump
- 3550 RPM
- 65 GPM
- 1400 TDH
- Stock No: 59627
Used Sulzer Bingham 6x8x14.5 HSB, # of stages, API 610 BB1 pump with the following features: • Steel case material – API 610 BB1 • Single stage • 13.49” impeller size and 316 SS material single stage double suction • 8" 600# RTJ suction flange • 6" 600# RTJ discharge flange • Mechanical Seals or packing??? Piping plan??? • Sleeve radial bearing • Ball/sleeve thrust bearing • CCW Rotation • C1026 case rings • 15-5PH shaft material • Weight: 2,190 lbs. • Dims (57” L x 43” W x 38” H)
Applications: Dewatering Pump, Pipeline Filling Pump, Frac Water Supply Pump, Oil Transfer Pump, Low NPSH Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 4180 RPM
- 1970 GPM
- 1333 TDH
- Stock No: 59574
Used Sulzer Bingham 4x6x10.5C MSD, API 610, BB3 pump with the following features: • case material • 3-stage • impeller • 6" 900# RF suction flange • 4" 900# RF discharge flange • CCW Rotation • Was in Oil Pipeline Service. On skid with 900 HP 3 Phase Electric Motor with a 800 W space heater. • Weight-approx 20,000 lbs shipping weight • Dims (197.5” L x 73.5” W x 75” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 900 HP
- 3560 RPM
- 1050 GPM
- 1250 TDH
- Stock No: 59540
Used Sulzer Bingham 4x6x10.5C MSD, API 610, BB3 pump with the following features: • case material • 3-stage • impeller • 6" 900# RF suction flange • 4" 900# RF discharge flange • CCW Rotation • Was in Oil Pipeline Service. On skid with 900 HP 3 Phase Electric Motor with a 800 W space heater. • Weight-approx 20,000 lbs shipping weight • Dims (197.5” L x 73.5” W x 75” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 900 HP
- 3560 RPM
- 1050 GPM
- 1250 TDH
- Stock No: 59539
Used United Z-3 X 9-WMSNH, API 610, BB3 pump with the following features: • Steel case material • 4-stage (first stage single suction) • impellers (first stage single suction) • 6” ANSI 900# RF suction flange • 3” ANSI 900# RF discharge flange • CCW Rotation • packaged with 300 HP motor • Weight 10,740 lbs • Dims 62"Lx34"Wx41"H • Skid dims 14'Lx5'Wx5'H
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Water Transfer Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3560 RPM
- 875 GPM
- 1360 TDH
- Stock No: 59475
Used Ingersoll-Rand 1 1/2 NTM4, centrifugal pump with the following features: • case material • 2 stage • impellers • 4”150# FF suction flange • 3”600# RF discharge flange • CCW Rotation • Weight 1,220 lbs • Dims 60"L x 24"W x 32"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Snowmaking Pump, Oil Transfer Pump, Oil & Gas Pipeline Pump, Production Pump
- 4825 RPM
- 185 GPM
- 1415 TDH
- Stock No: 59467
Used Ingersoll Rand 3x10DA-5, API 610, BB3 pump with the following features: • C-1026 Case Material • 15-5PH Stainless Steel Shaft • 410/20 Stainless Steel Impellers • 5-stage • 6" 600# RF suction connection • 3" 900# RF discharge connection • CCW Rotation • Pump was originally built for boiler feed applications • Weight 2,440 lbs • Dims 80"Lx22"Wx24"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Snowmaking Pump, Oil Transfer Pump, Desalination Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3570 RPM
- 740 GPM
- 1417 TDH
- Stock No: 59299
Used Sulzer Bingham 10x14x16.5 HSB, API 610, BB1 pump with the following features: • case material • Single stage • impeller-Double suction • 14" suction flange • 10" discharge flange • CCW Rotation • Weight 8,000 lbs • Dims 63"Lx73"Wx55"H
Applications: Dewatering Pump, Low NPSH Pump, Water Pipeline Pump
- 2000 HP
- 3560 RPM
- 6510 GPM
- 1245 TDH
- Stock No: 59215
Used Sulzer Bingham 10x14x17.5 HSB, API 610, BB1 pump with the following features: • case material • Single stage • impeller-Double suction • 14" suction flange • 10" discharge flange • CCW Rotation • Weight 6,000 lbs • Dims 63"Lx73"Wx55"H
Applications: Dewatering Pump, Low NPSH Pump, Water Pipeline Pump
- 2000 HP
- 3560 RPM
- 6510 GPM
- 1245 TDH
- Stock No: 59214