Industrial Centrifugal Pumps For Sale | Power Zone
200 TDH
Unused Surplus MCM 250 series 4x3x13 pump packaged with 225 HP Perkins diesel engine. Comes with hard iron fluid end which includes 11.5" impeller, casing with replaceable wear pad and stuffing box. Pump includes stainless steel shaft sleeve, premium bearings. Mounted on a fabricated oilfield base with belts and sheaves to operate pump at 3600 rpm, OSHA type belt guard and a Perkins 126F, 225 HP@2200 rpm, water cooled diesel engine. Unit includes 12 volt remote operated PTO clutch, 100 gallon in frame rails fuel tank and lines, spark arrester, battery and cables. Unit includes Murphy TEC10 instrument panel with electric key start, weatherproof enclosure, gauges and instrumentation including safety shut-off switches. Murphy TEC10 controller includes remote start/stop throttle control and PTO engagement and dis-engagement via Canbus controller with 40' cable. 600 gpm 225 HP 2200 rpm Weight 5,362 lbs Dims 109"Lx60"Wx80"H
Applications: Dewatering Pump, Slurry Pump, Pipeline Filling Pump, Water Transfer Pump, Paper Mill Pump, Oil Transfer Pump, Water Pipeline Pump, Engine Driven Pump, Charge Pump
- 225 HP
- 2200 RPM
- 600 GPM
- 600 TDH
- 12 Volts
- Stock No: 60441
Unused Flowserve 2HPX15A, API 610, OH2 pump with the following features: • S-6 Materials • Single stage • 14.13" impeller • 4” 300# RF suction flange • 2” 300# RF discharge flange • packaged on skid with 40 HP Baldor electric motor • CCW Rotation • 601 lbs Pump Weight • Pump Dims 32"Lx26"Wx26"H • Weight 3,960 lbs • Dims 85"L x57"W x 99"H
Applications: Dewatering Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Charge Pump
- 24.3 HP
- 1770 RPM
- 189 GPM
- 213 TDH
- Stock No: 60373
Unused Floway single stage volute type vertical pump. Weight 6,775 lbs Pump dims 122"Lx34"Wx24"H Case dims 31"Lx30"Wx30"H
Applications: Dewatering Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump
- 150 HP
- 1785 RPM
- 600 GPM
- 190 TDH
- Stock No: 60002
Unused Floway single stage volute type vertical pump. Weight 6,775 lbs Pump dims 122"Lx34"Wx24"H Case dims 31"Lx30"Wx30"H
Applications: Dewatering Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump
- 150 HP
- 1785 RPM
- 600 GPM
- 190 TDH
- Stock No: 60001
Unused Flowserve 10EGH/EGY, API 610, VS7 pump with the following features: • CA6NM SS case material • 7-stage • Y-7.72 H-7.44 stainless impeller • 8” 300# RFWN suction flange • 6”300# RFWN discharge flange • John Crane Mechanical Seals with piping plan 23 • CCW Rotation • Weight 5,815 lbs • Dims 132"Lx60"Wx60"H
Applications: Dewatering Pump, Water Well Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump
- 44 HP
- 1780 RPM
- 640 GPM
- 215 TDH
- Stock No: 59649
Unused Flowserve 10EGH/EGY, API 610, VS7 pump with the following features: • CA6NM SS case material • 7-stage • Y-7.72 H-7.44 stainless impeller • 8” 300# RFWN suction flange • 6”300# RFWN discharge flange • John Crane Mechanical Seals with piping plan 23 • CCW Rotation • Weight 5,815 lbs • Dims 132"Lx60"Wx60"H
Applications: Dewatering Pump, Water Well Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump
- 44 HP
- 1780 RPM
- 640 GPM
- 215 TDH
- Stock No: 59648
Used Ingersoll Rand 12x10x11 BTS, API 610, BB1 pump with the following features: • case material • Single stage • impeller • 12” 150# FF suction flange • 10” 150# FF discharge flange • CCW Rotation • Weight • Dims 45"Lx41"Wx36"H
Applications: Dewatering Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Low NPSH Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1800 RPM
- 2500 GPM
- 180 TDH
- Stock No: 59427
Used Ingersoll Rand 12x10x11 BTS, API 610, BB1 pump with the following features: • case material • Single stage • impeller • 12” 150# FF suction flange • 10” 150# FF discharge flange • CCW Rotation • Weight • Dims 45"Lx41"Wx36"H
Applications: Dewatering Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Low NPSH Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1800 RPM
- 2500 GPM
- 180 TDH
- Stock No: 59426
Used Ingersoll Rand 12x10x11 BTS, API 610, BB1 pump with the following features: • case material • Single stage • impeller • 12” 150# FF suction flange • 10” 150# FF discharge flange • CCW Rotation • Weight • Dims 45"Lx41"Wx36"H
Applications: Dewatering Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Low NPSH Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1800 RPM
- 2500 GPM
- 180 TDH
- Stock No: 59425
Used Ingersoll Rand 12x16x23SLA, API 610, BB3 pump with the following features: • case material • Single stage • impeller • 16" 125# ANSI FF suction flange • 12" 125# ANSI FF discharge flange • CCW Rotation • Weight 4,560 lbs • Dims 58"Lx75"Wx53"H
Applications: Dewatering Pump, Water Wastewater Pump, Low NPSH Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 301 HP
- 1180 RPM
- 7500 GPM
- 200 TDH
- Stock No: 59294
Used Sulzer Bingham 14x14x16.5HSB, API 610, BB1 pump with the following features: • Carbon steel case material • Single stage • 15 3/4" impeller • 14” 600# suction flange • 14” 600# discharge flange • CCW Rotation • Weight • Dims 55"Lx64"Wx43"H
Applications: Dewatering Pump, Water Wastewater Pump, Low NPSH Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1760 RPM
- 4800 GPM
- 210 TDH
- Stock No: 58672
Used Worthington 6HNN93 pump with the following features: • CA6 case material • Single stage • impeller • 8" 300# RF suction flange • 6" 300# RF discharge flange • CCW Rotation • Weight • Dims
Applications: Dewatering Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 2950 RPM
- 1200 GPM
- 197 TDH
- Stock No: 58014
Used Peerless 8196 Centrifugal pump with the following features: • Ductile iron case material • Single stage • impeller • 3" 150# FF suction flange • 2" 150# FF discharge flange • CCW rotation • Weight • Dims
Applications: Dewatering Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Charge Pump
- 350 RPM
- 350 GPM
- 220 TDH
- Stock No: 57865
Used Union 6x8x15 HTS, API 610, OH2 Centrifugal pump with the following features: • CA-6NM case material • Single stage • impeller • 8" 1500# suction flange • 6" 1500# discharge flange • Flowserve DHTW seal • Weight • Dims
Applications: Dewatering Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 2213 GPM
- 215 TDH
- Stock No: 57722
Used Union 6x8x15 HTS, API 610, OH2 Centrifugal pump with the following features: • CA-6NM case material • Single stage • impeller • 8" 1500# suction flange • 6" 1500# discharge flange • Flowserve DHTW seal • Weight • Dims
Applications: Dewatering Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 2213 GPM
- 215 TDH
- Stock No: 57721
Used Union 6x8x15 HTS, API 610, OH2 Centrifugal pump with the following features: • CA-6NM case material • Single stage • impeller • 8" 1500# suction flange • 6" 1500# discharge flange • Flowserve DHTW seal • Weight • Dims
Applications: Dewatering Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 2213 GPM
- 215 TDH
- Stock No: 57720
Used Union 6x8x15 HTS, API 610, OH2 centrifugal pump with the following features: • CA6NM case material • Single stage • 15 5/8" impeller • 8” 1500# suction flange • 6” 1500# discharge flange • Flowserve DHTW seal • Weight • Dims
Applications: Dewatering Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 2213 GPM
- 215 TDH
- Stock No: 57479
Used Union 6x8x15 HTS, API 610, OH2 centrifugal pump with the following features: • CA6NM case material • Single stage • 15 5/8" impeller • 8” 1500# suction flange • 6” 1500# discharge flange • Flowserve DHTW seal • Weight • Dims
Applications: Dewatering Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 2213 GPM
- 215 TDH
- Stock No: 57478
Used Union 6x8x15 HTS, API 610, OH2 centrifugal pump with the following features: • CA6NM case material • Single stage • 15 5/8" impeller • 8” 1500# suction flange • 6” 1500# discharge flange • Flowserve DHTW seal • Weight • Dims
Applications: Dewatering Pump, Oil Transfer Pump, Water Wastewater Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 2213 GPM
- 215 TDH
- Stock No: 57477