Industrial Equipment For Sale | Power Zone
Used Sulzer Bingham 6x8x10.5 HT-CP BB5 barrel case hydraulic turbine Centrifugal pump with the following features: • SS/CS outter barrel case material • 6 stage • 10.5" impellers • 8" 1500# suction flange • 6" 1500# discharge flange • CCW rotation • Weight • Dims 96"Lx38"Wx34"H
Applications: Saltwater Disposal Pump, Dewatering Pump, Boiler Feed Water Pump, Frac Water Supply Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3580 RPM
- 1200 GPM
- 2600 TDH
- Stock No: 56444
Good used 4.44:1 pinion shaft with pinion gear, 25 teeth (not a complete set)
- 160 HP
- Ratio: 4.4400
- Stock No: 56439
Used Lightnin 208-RSES-25 Right Angle gearbox with following features: • 20 HP Service Rating • 20 HP Catalogue Rating • 6.2:1 Ratio • 1760 Input Speed • 283 Output Speed • Weight • Dims
- 25 HP
- 1760/283 RPM
- Ratio: 6.2000
- Stock No: 56434
Used General Electric 20 HP electric motor with following features: • 1760 RPM • 208-220/440 Volts • 53/50/35 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 286U Frame • K Type • Weight • Dims
- 20 HP
- 1760 RPM
- 3 Phase
- 208-220/440 Volts
- Frame Type: 286U
- Stock No: 56433
Used Tamper 25 HP electric motor with following features: • 1769 RPM • 208-220/440 Volts • 63.5/60/30 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 324U Frame • BGK-5419A Type • Weight • Dims
- 25 HP
- 1769 RPM
- 3 Phase
- 208-220/440 Volts
- Frame Type: 324U
- Stock No: 56431
Used General Electric 25 HP electric motor with following features: • 1770 RPM • 208-220/440 Volts • 69/65/32.5 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 324U Frame • K Type • Weight • Dims
- 25 HP
- 1770 RPM
- 3 Phase
- 208-220/440 Volts
- Frame Type: 324U
- Stock No: 56429
Used U.S. Electric 7.5 HP electric motor with following features: • 1760 RPM • 230/460 Volts • 19/9.5 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 213T Frame • TCE Type • Weight • Dims
- 7.5 HP
- 1760 RPM
- 3 Phase
- 230/460 Volts
- Frame Type: 213T
- Stock No: 56418
Used Siemens 75 HP electric motor with following features: • 1770 RPM • 460 Volts • 84.8 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 365LP Frame • RGZZVILSD Type • Weight • Dims
- 75 HP
- 1770 RPM
- 3 Phase
- 460 Volts
- Frame Type: 365LP
- Stock No: 56415
Used gearbox for triplex pump
- 100 HP
- 450 RPM
- Ratio: 3.9470
- Stock No: 56412
Used gearbox for triplex pump
- 100 HP
- 450 RPM
- Stock No: 56411
Used gearbox for Oilwell pump, ratio is 7.316:1
- 267 HP
- 278/38 RPM
- Ratio: 7.3160
- Stock No: 56410
Used gearbox for triplex pump
- 60 HP
- 500 RPM
- Ratio: 3.9500
- Stock No: 56409
Used Detroit GA270 diesel engine with following features: • 270 HP • 1800 RPM • Inline 6 Cylinder, 4 stroke • 117.0 mm (4.59 in) Bore • 113.0 mm (4.68 in) Stroke • 7.6 L (466 in3) Displacement • Air to Air charge cooled • CCW Rotation (from flywheel end) • SAE #2 Flywheel housing • Electric starting system • Weight 1,367 lbs (dry weight, engine only) • Dims (44.69”L x 27.72”W x 39.61” H)
- 270 HP
- 1800 RPM
- Ratio: 16.4000
- Stock No: 56403
Used National J-150-M triplex pump fluid end only with the following features: • 5" stroke • 150 HP • Steel billet fluid end • capable of 82 gpm @ 2850 psi with 2" plungers or 154 gpm @ 1500 psi with 2 3/4" plungers • tapered valve seats, no caps • 5" suction connection • 2 1/4" discharge connection • Weight • Dims
Applications: Well Service Pump, Water Transfer Pump, Production Pump
- 150 HP
- 400 RPM
- 154 GPM
- 1500 PSI
- Stock No: 56401
Used Oilwell A-356 triplex production pump fluid end only with the following features: • 6" stroke • 160 HP • Cast iron fluid end • 5" plungers • 6" ANSI 300# FF suction connection • 4" ANSI 600# RTJ discharge connection • Weight 4,925 lbs • Dims
Applications: Well Service Pump, Water Transfer Pump, Snowmaking Pump, Oil Transfer Pump, Amine Pump, Production Pump
- 160 HP
- 320 RPM
- 489 GPM
- 505 PSI
- Stock No: 56398
Used Union TX-115 triplex pump fluid end only with the following features: • 4" stroke • 115 HP • Steel billet fluid end • plungers • 4" 300# RF suction connection • 2.5" 600# RTJ discharge connection • Weight 3,000 lbs • Dims
Applications: Water Jetting Pump, Pressure Testing Pump, Well Service Pump, Water Transfer Pump
- 115 HP
- 411 RPM
- 51 GPM
- 5500 PSI
- Stock No: 56396
Used Union TX-150 triplex production pump with the following features: • 5" stroke • 200 HP • Three piece steel fluid end • 2.25'' plungers • No crankshaft, capable of 40 gpm @ 5000 psi @ 303 rpm with 1.625" plungers or 78 gpm @ 3018 psi @ 303 rpm with 2.25" plungers • 3" 300# RF suction connection • 2" 2500# RTJdischarge connection • Weight 5,800 lbs • Dims 65"Lx48"Wx28"H
Applications: Pressure Testing Pump, Well Service Pump, Water Transfer Pump, Production Pump
- 200 HP
- 303 RPM
- 78 GPM
- 3018 PSI
- Stock No: 56395
Used Union TX-200 triplex pump with the following features: • 5" stroke • 200 HP • #2 steel fluid end • 2.25" stainless steel plungers • 3" FF suction connection • 2" FF discharge connection • 8.2:1 gear ratio • Weight 5,800 lbs • Dims 65"Lx48"Wx28"H
Applications: Pressure Testing Pump, Well Service Pump, Water Transfer Pump, Production Pump
- 200 HP
- 369 RPM
- 95 GPM
- 3018 PSI
- Ratio: 8.2000
- Stock No: 56394
Used Union TX-200 triplex pump with the following features: • 5" stroke • 200 HP • #2 steel fluid end • 2.25" stainless steel plungers • 3" FF suction connection • 2" FF discharge connection • Weight 5,800 lbs • Dims 68"Lx54"Wx37"H
Applications: Pressure Testing Pump, Well Service Pump, Water Transfer Pump, Production Pump
- 200 HP
- 369 RPM
- 95 GPM
- 3018 PSI
- Stock No: 56393
Used parallel gear reducer, 6.187 ratio, 1750 input rpm, 283 output rpm Dims 38"Lx35"Wx27"H
- 1750/283 RPM
- Ratio: 6.1870
- Stock No: 56386