Industrial Equipment For Sale | Power Zone
Marklift Electric scissor lift *For sale as-is, not operational. Best for parts or repair.
- Stock No: 55581
Used Worthington 2H3LS 2 Centrifugal pump with the following features: • Alloy20 case material • 2-stage • impellers • 3" suction flange • 3" discharge flange • Weight • Dims
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Oil Transfer Pump
- 3510 RPM
- 105 GPM
- 530 TDH
- Stock No: 55531
Used power unit with clutch and radiator on skid with Gardner Denver compressor, engine block cast # 145020-H
- 120 HP
- 1600 RPM
- Stock No: 55520
Used power unit with clutch and radiator
- 120 HP
- 1600 RPM
- Stock No: 55518
Used Waukesha F-817 GU Natural Gas engine radiator through flywheel with following features: • 190 HP • 2000 RPM • Inline 6 Cylinder, 4 stroke • 137.0 mm (5.375 in) Bore • 152.0 mm (6.0 in) Stroke • 13.31 L (817 in3) Displacement • Naturally Aspirated • CCW Rotation (from flywheel end) • SAE #0 Flywheel housing • Electric or Pneumatic starting system • Weight 2,780 lbs (dry weight, engine only) • Dims
- 190 HP
- 2000 RPM
- Ratio: 9.0000
- Stock No: 55507
Used Waukesha F-817 GU Natural Gas engine with following features: • 190 HP • 2000 RPM • Inline 6 Cylinder, 4 stroke • 137.0 mm (5.375 in) Bore • 152.0 mm (6.0 in) Stroke • 13.31 L (817 in3) Displacement • Naturally Aspirated • CCW Rotation (from flywheel end) • SAE #0 Flywheel housing • Electric or Pneumatic starting system • Weight 2,780 lbs (dry weight, engine only) • Dims
- 190 HP
- 2000 RPM
- Ratio: 9.0000
- Stock No: 55510
Used Waukesha F-817 GU Natural Gas engine radiator through flywheel with following features: • 190 HP • 2000 RPM • Inline 6 Cylinder, 4 stroke • 137.0 mm (5.375 in) Bore • 152.0 mm (6.0 in) Stroke • 13.31 L (817 in3) Displacement • Naturally Aspirated • CCW Rotation (from flywheel end) • SAE #0 Flywheel housing • Electric or Pneumatic starting system • Weight 2,780 lbs (dry weight, engine only) • Dims
- 190 HP
- 2000 RPM
- Ratio: 9.0000
- Stock No: 55513
Used Waukesha F-817 GU Natural Gas engine with following features: • 190 HP • 2000 RPM • Inline 6 Cylinder, 4 stroke • 137.0 mm (5.375 in) Bore • 152.0 mm (6.0 in) Stroke • 13.31 L (817 in3) Displacement • Naturally Aspirated • CCW Rotation (from flywheel end) • SAE #0 Flywheel housing • Electric or Pneumatic starting system • Weight 2,780 lbs (dry weight, engine only) • Dims
- 190 HP
- 2000 RPM
- Ratio: 9.0000
- Stock No: 55515
Used Ingersoll Rand 5HMTA-7, API 610, BB3 pump with the following features: • 5Cr case material • 7-stage • impellers • 8" 600# suction flange • 6" 900# discharge flange • CW Rotation • Sleeve type radial and Kingsbury thrust bearings • Weight 4,608 lbs • Dims 101"Lx52"Wx36"H
Applications: Saltwater Disposal Pump, Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Water Transfer Pump, Frac Water Supply Pump, Snowmaking Pump, Steel Mill Descaling Pump, Desalination Pump, Amine Pump, Water Pipeline Pump, Production Pump
- 3560 RPM
- 1000 GPM
- 2500 TDH
- Stock No: 55502
Division 1 boiler rated at 1000PSI @200 degrees fahrenheit with exhaust stack Tank is between 60 and 65 gallons.
- 1000 PSI
- Stock No: 55490
Used 30"OD x 10' horizontal test separator, MAWP: 1200psi@200deg, NB: 6113. instr. Gas scrubber, 10 3/4"ODx4' S/S, MAWP: 125psi@130deg, serial number 9460. salt filter, 8 5/8" ODx3'5" LG S/E, MAWP: 125psi@130deg, serial number 9462. indirect heater, 30" ODx12' E/E, glycol capacity 360gal, 200,000btu, serial number 7235-10. flow coil, 4 pass, 2 1/2" XXH, MAWP: 5000psig, serial number 7297-4
- 1200 PSI
- Stock No: 55489
Unused Shell/Tube Exchanger. It is very clean, shell has MAWP of 150 PSI @ 350 degrees F, size 08-098, built in 1991, 2"NPTF fittings in shell. Mounting brackets for installation. This unit is 8' 4 1/2" long x 27 1/4" in diameter. It has 44 tubes that have a 1/2" inside diameter and are approximately 8' long.
- 150 PSI
- Stock No: 55464