- {{tag.text}} ×
PLEASE NOTE: Keep an eye out for a verification email (check your junk or spam). When you see the email, be sure the click on the link to verify your email address.
Rebuilt Allis Chalmers 4500 HP electric motor with following features: • 3569 RPM • 4160 Volts • 525 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • ODP Enclosure • 4586 Frame • ANW Type • Weight • Dims
- 4500 HP
- 3569 RPM
- 3 Phase
- 4160 Volts
- Frame Type: 4586
- Stock No: 58238
REBUILT: Gardner Denver Frac pump with the following features: • 8" stroke • 2250 HP • 4.5" Carbon Steel Fluid End • 4.5” Plungers • 6.353:1 gear ratio • Weight 12,650 • Dims (90”L x 68”W x 43” H)
- 2250 HP
- 330 RPM
- 545 GPM
- 14000 PSI
- Ratio: 6.3530
- Stock No: 58267
REBUILT: Oilwell A-336-H same as National 202T-6M triplex pump with the following features: • 6" stroke • 202HP • Aluminum bronze fluid end • 2 1/4" plungers • 4" 150# FF suction connection • 2.5" 1500# LR discharge connection • 5.48:1 integral gear box • Weight 3,952 lbs • Dims (24'L x 9'W x 8.5'H)
- 202 HP
- 320 RPM
- 99 GPM
- 3145 PSI
- Ratio: 5.4800
- Stock No: 55775
INSTALLED ON RENTAL: REBUILT: #3 Monel fluid end only complete with stuffing boxes, valves and 2 7/8" plungers, 4" suction and 2" discharge, capable of 159gpm @ 847psi with 3 1/8" plungers or 82gpm @ 1635psi with 2 1/4" plungers
- 90 HP
- 411 RPM
- 134 GPM
- 1000 PSI
- Stock No: 57000
REBUILT National J-150-LCS triplex production pump with the following features: • 5" stroke • 150 HP • Low pressure aluminum bronze fluid end • 4" plungers • delrin disc valves • 838 packing • 6" 150# F.F. suction connection • 3" 2000# R.J. discharge connection • Weight • Dims
- 150 HP
- 400 RPM
- 286 GPM
- 700 PSI
- Stock No: 58074
Rebuilt BB1 horizontal split case, single stage, 14'' discharge in front, 18'' suction at rear, 27 3/4" Impeller, packing
- 1180 RPM
- 8500 GPM
- 347 TDH
- Stock No: 52965
ON RENTAL PACKAGE: REBUILT: Bare quintuplex power end
- 240 HP
- 400 RPM
- Stock No: 56882
REBUILT Gaso 3968 bare shaft triplex pump with the following features: • 5" stroke • 120 HP • Steel billet fluid end • 2 3/4" steel plungers • Used valve seats with new delrin discs • 838 packing • New conrod bearings • New wrist pins and bushings • 4" suction connection • 2" discharge connection • Weight 4,030 lbs • Dims 68"Lx39"Wx24"H
- 120 HP
- 360 RPM
- 139 GPM
- 1325 PSI
- Stock No: 56573
REBUILT Gaso 3968 bare shaft triplex pump with the following features: • 5" stroke • 120 HP • Steel billet fluid end • 2 3/4" steel plungers • AR wing guided valves • 838 packing • New end main bearings, new crank pin bearings • New wrist pin bushings, new wrist pins, new cast iron junk rings, new cast iron lantern rings, new cast iron followers • 4" suction connection • 2" discharge connection • Weight 4,030 lbs • Dims 68"Lx39"Wx24"H
- 120 HP
- 360 RPM
- 139 GPM
- 1325 PSI
- Stock No: 56572
REBUILT Union TX-90 triplex pump fluid end only with the following features: • 4" stroke • 90HP • Cast steel fluid end • 3.5" plungers • 5" 150# RF suction connection • 2.5" 600# RTJ discharge connection • with piping, gauges, relief valve, and dampeners • Weight • Dims
- 90 HP
- 411 RPM
- 205 GPM
- 676 PSI
- Stock No: 55701
REBUILT: Horizontal split case 6 stage diffuser centrifugal pump, 6" 300 suction, 4" 900 discharge, packing, CCW rotation from coupling side
- 3800 RPM
- 1135 GPM
- 1850 TDH
- Stock No: 57483
REBUILT: Single stage centrifugal pump with 21" stainless steel impeller, 8" suction, 6" discharge
- 1780 RPM
- 1750 GPM
- 440 TDH
- Stock No: 55794
REBUILT Wheatley P-200-B triplex production pump with the following features: • 2 3/16" stroke • 22 HP • Steel fluid end • 1 3/4" steel plungers • New disc valves • 838 packing • 3" suction connection • 1" discharge connection • Weight 560 lbs • Dims
- 22 HP
- 500 RPM
- 32 GPM
- 1060 PSI
- Stock No: 57310
Unused Vertical turbine cast iron pump bowls. 3 stage, Appear to be new or rebuilt. Built 8-30-85. Casting No. JP-4457 weight 1,160 lbs dims 91"L x 20"W x 20"H
- 1770 RPM
- 4000 GPM
- 400 TDH
- Stock No: 56540
REBUILT: ANSI single stage centrifugal pump, cast iron, 9.5" impeller, 6" suction, 4" discharge
- 1800 RPM
- 700 GPM
- 90 TDH
- Stock No: 55140
Rebuilt Ajax DP-80 Pumpjack engine radiator through flywheel with following features: • 80 HP • 250/400 RPM • 1 Cylinder • 279.4 mm (11.0 in) Bore • 355.6 mm (14.0 in) Stroke • 21.79 L (1330 in3) Displacement • Naturally Aspirated • Electric starting system • Weight • Dims
- 80 HP
- 250-400 RPM
- Stock No: 56477
Rebuilt Ajax DP-80 Pumpjack engine radiator through flywheel with following features: • 80 HP • 250/400 RPM • 1 Cylinder • 279.4 mm (11.0 in) Bore • 355.6 mm (14.0 in) Stroke • 21.79 L (1330 in3) Displacement • Naturally Aspirated • Electric starting system • Weight • Dims
- 80 HP
- 250-400 RPM
- Stock No: 56476
Used power end only, needs to be rebuilt
- 60 HP
- Stock No: 58327
Rebuilt David Brown Radicon A04050 URN-L worm gear reducer gearbox with following features: • 92 HP Service Rating • 92 HP Catalogue Rating • 50:1 Ratio • 1750 Input Speed • 35 Output Speed • Service Factor • Weight 1,811 lbs • Dims
- 92 HP
- 1750/35 RPM
- Ratio: 50.0000
- Stock No: 57551
Rebuilt transmission, 1250Lbs Ft max tq, 10 speed
- Ratio: 9.9600
- Stock No: 57255