Industrial Equipment For Sale | Power Zone
Used Oilwell B-558 quintuplex production pump fluid end only with the following features: • 8" stroke • 630 HP • Aluminum bronze fluid end • suction connection • discharge connection • Weight: 3,860 lbs. • Dims: 63"(L)x 29"(W)x 12"(H)
Applications: Well Service Pump, Frac Water Supply Pump, Steel Mill Descaling Pump, Production Pump
- 630 HP
- 225 RPM
- 925 GPM
- 1765 PSI
- Stock No: 58156
Used bare case, one cross head slide is scarred
Applications: Well Service Pump, Frac Water Supply Pump, Production Pump
- 630 HP
- 225 RPM
- 925 GPM
- 1765 PSI
- Stock No: 58155
Used Western 7218 parallel shaft gear reducer gearbox with following features: • 300 HP Service Rating • 300 HP Catalogue Rating • 9.3:1 Ratio • 1150 Input Speed • 124 Output Speed • 2.32 Service Factor • Weight • Dims 58"Lx60"Wx38"H
- 300 HP
- 1150/124 RPM
- Ratio: 9.3000
- Stock No: 58149
Used complete quintuplex power end only • Weight 7,000 lbs.
Applications: Pressure Testing Pump, Well Service Pump
- 630 HP
- 225 RPM
- 374 GPM
- 4000 PSI
- Stock No: 58144
Used Wilson Snyder 1.5x2x10.5 Centrifugal pump with the following features: • Ductile iron case material • Single stage • 10.5"impeller • 2"suction flange • 1.5" discharge flange • CW Rotation • Weight • Dims
Applications: Dewatering Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Charge Pump
- 3550 RPM
- 82 GPM
- 60 TDH
- Stock No: 58143
ZYZJ ZYF-1600 Bare Case with the following features: • 120 RPM • 719 GPM • 4975 PSI • 120 HP • 12 Size • 4.206 Ratio
Applications: Slurry Pump, Pressure Testing Pump, Well Service Pump, Mud Pump
- 1600 HP
- 120 RPM
- 719 GPM
- 4975 PSI
- Ratio: 4.2060
- Stock No: 58142
Used ZYZJ ZYF-1600 Triplex Pump. 12" stroke mud pump with bare steel fluid end. This pump is missing the below parts. Power end gears look in good condition. 2 – Wiper Box Rings and Seals 2 – Cross Heads 2 – Wrist Pins and Wrist Pin Retainers 3 – Stuffing Box Nuts – Liner Retainers 3 – Pony Rods 6 – Valve Covers – Locks 6 – Valves and Valve Springs 3 – Plungers / Piston Rods 1 - Suction Manifold
Applications: Slurry Pump, Pressure Testing Pump, Well Service Pump, Mud Pump, Production Pump
- 1600 HP
- 120 RPM
- 719 GPM
- 3392 PSI
- Ratio: 4.2060
- Stock No: 58141
Used single stage vertical turbine pump, H impeller, CCW rotation
Applications: Dewatering Pump, Water Well Pump, Water Transfer Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump
- 3550 RPM
- 525 GPM
- 78 TDH
- Stock No: 58135
Used single stage vertical turbine pump, H impeller, CCW rotation, about 25 feet long, 10 inch 125# discharge flange. Ductile iron construction, 1225 gpm at 78 feet head.
Applications: Dewatering Pump, Water Well Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1775 RPM
- 1225 GPM
- 78 TDH
- Stock No: 58134
Used Sulzer Bingham 6x8x12.5A MSD, API 610, BB3 pump with the following features: • 2507 SS(Duplex) case material • 7 stage • 12 1/8"impellers • 8" 1500# RTJ suction flange • 6" 1500# RTJ discharge flange • CCW Rotation • Weight 8,440 lbs • Dims 126"Lx36"Wx40"H
Applications: Saltwater Disposal Pump, Dewatering Pump, Boiler Feed Water Pump, Frac Water Supply Pump, CO2 Pipeline Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump
- 3575 RPM
- 2188 GPM
- 3525 TDH
- Stock No: 58133
Used 2-stage Horizontal Split Case 8x10x16, API 610, BB1 pump with the following features: • Ductile iron case material • 2 stage • 15.5"impellers • 10"150# suction flange • 8"150# discharge flange • CW Rotation • Weight • Dims 64"Lx38"Wx30"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Wastewater Pump, Water Pipeline Pump, Flood Water Control Pump
- 1750 RPM
- 3400 GPM
- 400 TDH
- Stock No: 58126
Used Detroit 6V-92T diesel engine with following features: • 322 HP • 2100 RPM • V-6 Cylinder, 2 cycle • 123.0 mm (4.84 in) Bore • 127.0 mm (5.0 in) Stroke • 9.05 L (552 in3) Displacement • Turbocharged (air to air aftercooled) Aspiration • CCW Rotation (from flywheel end) • Flywheel housing • Electric starting system • Weight 2,005 lbs (dry weight, engine only) • Dims (41”L x 39”W x 52” H)
- 322 HP
- 2100 RPM
- Ratio: 17.0000
- Stock No: 58125
Used screw pump, 316 SS, 12"150# x 6" 300# x 4" 600#, CCW rotation
Applications: Multiphase Pump, Gas Well Deliquification Pump, Oil Transfer Pump, Chemical Pump, High Viscosity Pump, Oil & Gas Pipeline Pump, Production Pump
- 1150 RPM
- 242 GPM
- 428 PSI
- Stock No: 58124
Used 125 HP electric motor with following features: • 1785 RPM • 230/460 Volts • 304/152 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • ODP Enclosure • 405T Frame • Weight • Dims
- 125 HP
- 1785 RPM
- 3 Phase
- 230/460 Volts
- Frame Type: 405T
- Stock No: 58115
Used General Electric 100 HP electric motor with following features: • 1180 RPM • 440 Volts • 125 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • ODP Enclosure • 6323 Frame • K Type • Weight • Dims
- 100 HP
- 1180 RPM
- 3 Phase
- 440 Volts
- Frame Type: 6323
- Stock No: 58111
Used Marathon Electric 250 HP electric motor with following features: • 3580 RPM • 480 Volts • 260 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • 505S Frame • EF Type • Weight • Dims
- 250 HP
- 3580 RPM
- 3 Phase
- 480 Volts
- Frame Type: 505S
- Stock No: 58106
Used Westinghouse 300 HP electric motor with following features: • 3560 RPM • 480 Volts • 310 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • ODP Enclosure • 506-US Frame • Weight 1,252 lbs • Dims (60”L x 48”W x 50” H)
- 300 HP
- 3560 RPM
- 3 Phase
- 480 Volts
- Frame Type: 506-US
- Stock No: 58104
REBUILT Gardner Denver TEEA triplex production pump fluid end only with the following features: • 5" stroke • 165 HP • Aluminum Bronze fluid end • 3 1/4" plungers, 2 new colmonoy 1 used carbide plungers • SS wing guided AR valves • 838 packing • 6" suction flange connection • 3" threaded discharge, connection • Weight • Dims
Applications: Well Service Pump, Water Transfer Pump, Snowmaking Pump, Oil Transfer Pump, Steel Mill Descaling Pump, Cement Pump, Production Pump
- 165 HP
- 350 RPM
- 188 GPM
- 940 PSI
- Stock No: 58100
Used Oilwell 336-P triplex production pump power frame only with the following features: • 6" stroke • 160 HP • 4.44 (integral or pinion or eternal gear box) gear ratio • Weight • Dims
Applications: Well Service Pump, Water Transfer Pump, Production Pump
- 160 HP
- 320 RPM
- 122 GPM
- 2040 PSI
- Ratio: 4.4400
- Stock No: 58095