Industrial Pumps For Sale | Power Zone
1000 GPM
Unused Surplus MCM 250 series 4x3x13 pump packaged with 225 HP Perkins diesel engine. Comes with hard iron fluid end which includes 11.5" impeller, casing with replaceable wear pad and stuffing box. Pump includes stainless steel shaft sleeve, premium bearings. Mounted on a fabricated oilfield base with belts and sheaves to operate pump at 3600 rpm, OSHA type belt guard and a Perkins 126F, 225 HP@2200 rpm, water cooled diesel engine. Unit includes 12 volt remote operated PTO clutch, 100 gallon in frame rails fuel tank and lines, spark arrester, battery and cables. Unit includes Murphy TEC10 instrument panel with electric key start, weatherproof enclosure, gauges and instrumentation including safety shut-off switches. Murphy TEC10 controller includes remote start/stop throttle control and PTO engagement and dis-engagement via Canbus controller with 40' cable. 600 gpm 225 HP 2200 rpm Weight 5,362 lbs Dims 109"Lx60"Wx80"H
Applications: Dewatering Pump, Slurry Pump, Pipeline Filling Pump, Water Transfer Pump, Paper Mill Pump, Oil Transfer Pump, Water Pipeline Pump, Engine Driven Pump, Charge Pump
- 225 HP
- 2200 RPM
- 600 GPM
- 600 TDH
- 12 Volts
- Stock No: 60441
Used Flowserve 4HPX25A, Single Stage, API 610, OH2 pump, with the following features: • 1026 Steel case material • Single Stage • 8" ANSI 300# RF suction • 4" ANSI 300# RF discharge • Rotation CCW • Weight: 2,200 lbs. • Dims: 40"(L)x 40"(W)x 39"(H)
- 1750 RPM
- 1031 GPM
- 464 TDH
- Stock No: 60857
Unused Surplus United 6x10x17M DSHF same as DVSHF, Single Stage, API 610, BB2 pump with the following features: • 1026 Steel case material • Single Suction • 10" ANSI 300# RF suction • 6" ANSI 300# RF discharge • Rotation CCW • Weight: 3,120 lbs. • Dims: 57"(L)x 34"(W)x 50"(H)
- 3600 RPM
- 1090 GPM
- 1126 TDH
- Stock No: 60849
Used Sulzer Bingham 4X6X10.5 MSD, 4 stage, API 610 BB3 pump, with the following features: • Carbon Steel case material • 4 stage single suction • 6" 600# RF suction • 4" 900# RF discharge • CCW Rotation • Weight: 2,920 lbs. • Dims: 70"(L)x 34"(W)x 50"(H)
Applications: Boiler Feed Water Pump, Oil & Gas Pipeline Pump
- 3600 RPM
- 1020 GPM
- 1500 TDH
- Stock No: 60833
Rebuilt Flowserve 4x6x10 7/5, 7 stage de-staged to 5, API 610, BB3 pump with the following features: • 1117- CS case material • 7 Stage de-staged to 5 , single suction • 6" ANSI 900# suction • 4" ANSI 900# discharge • CCW Rotation • Weight: 3,820 lbs. • Dims: 88"(L)x 34"(W)x 42"(H)
- 3600 RPM
- 970 GPM
- 1925 TDH
- Stock No: 60829
Used Oilwell B-558 Quintuplex pump with the following features: • 8" stroke • 630 HP • Cast steel fluid end • 4.5” plungers • 6" suction connection • 4" discharge connection • Weight • Dims 90"Lx84"Wx37"H
Applications: Well Service Pump, Frac Water Supply Pump, Snowmaking Pump, Amine Pump, Production Pump
- 630 HP
- 225 RPM
- 925 GPM
- 1050 PSI
- Stock No: 60399
Used United N-4x11 MSN-H, API 610, BB3 pump with the following features: • CS case material • 4 stage • 9-11/16 dia impellers • 6” 600# RF suction flange • 6” 600# RF discharge flange • CCW Rotation • Weight 5,000 lbs • Dims 84"x35"Wx48"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Water Transfer Pump, Frac Water Supply Pump, Oil Transfer Pump, CO2 Pipeline Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3560 RPM
- 1000 GPM
- 1500 TDH
- Stock No: 60080
Used United N-4x11 MSN-H, API 610, BB3 pump with the following features: • CS case material • 4 stage • impellers • 6” 600# RF suction flange • 6” 600# RF discharge flange • CCW Rotation • Weight 5,000 lbs • Dims 84"x35"Wx48"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Water Transfer Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3560 RPM
- 1000 GPM
- 1500 TDH
- Stock No: 60079
Used Goulds 3196 pump with the following features: • RPM: 1780 • GPM: 1100 • TDH: 130 • Impeller Size: 12.75" • Size: 4 x 6 - 13 • Weight 405 lbs • Dims ( 40'L x 20'W x 27' H )
Applications: Dewatering Pump, Pumped Storage Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1780 RPM
- 1100 GPM
- 130 TDH
- Stock No: 59985
Used Weinman 4L1 pump with the following features: • case material • Single stage • impeller • 5”150# FF suction flange • 4”150# FF discharge flange • On skid with motor. • Weight 500 lbs • Skid dims 62"Lx28"Wx27"H • Pump dims 28"Lx26"Wx24"H
Applications: Dewatering Pump, Water Transfer Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 1000 GPM
- 110 TDH
- Stock No: 59852
Used Weinman 4L1 pump with the following features: • case material • Single stage • impeller • 5”150# FF suction flange • 4”150# FF discharge flange • On skid with motor. • Weight 500 lbs • Skid dims 62"Lx28"Wx27"H • Pump dims 28"Lx26"Wx24"H
Applications: Dewatering Pump, Water Transfer Pump, Frac Water Supply Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump
- 1750 RPM
- 1000 GPM
- 110 TDH
- Stock No: 59850
Used Sulzer Bingham 4x6x10.5C MSD, API 610, BB3 pump with the following features: • case material • 3-stage • impeller • 6" 900# RF suction flange • 4" 900# RF discharge flange • CCW Rotation • Was in Oil Pipeline Service. On skid with 900 HP 3 Phase Electric Motor with a 800 W space heater. • Weight-approx 20,000 lbs shipping weight • Dims (197.5” L x 73.5” W x 75” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 900 HP
- 3560 RPM
- 1050 GPM
- 1250 TDH
- Stock No: 59540
Used Sulzer Bingham 4x6x10.5C MSD, API 610, BB3 pump with the following features: • case material • 3-stage • impeller • 6" 900# RF suction flange • 4" 900# RF discharge flange • CCW Rotation • Was in Oil Pipeline Service. On skid with 900 HP 3 Phase Electric Motor with a 800 W space heater. • Weight-approx 20,000 lbs shipping weight • Dims (197.5” L x 73.5” W x 75” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 900 HP
- 3560 RPM
- 1050 GPM
- 1250 TDH
- Stock No: 59539
Used Sulzer Bingham 4x8x10.5B MSDD, centrifugal pump with the following features: • CS case material (Cast steel) • 5 stage (first stage double suction) • 10.5” impellers (first stage double suction) • 8”600 lbs suction flange • 4”600 lbs discharge flange • Mechanical Seals • Ball radial bearing • Ball thrust bearing • CCW Rotation • Weight 3,375 lbs • Dims (80”L x 37”W x 45” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Water Transfer Pump, Snowmaking Pump, CO2 Pipeline Pump, Low NPSH Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3560 RPM
- 1000 GPM
- 2142 TDH
- Stock No: 59441
Used Sulzer Bingham 4x8x10.5C MSDD, centrifugal pump with the following features: • CS case material (Cast steel) • 5 stage (first stage double suction) • 10.5” impellers (first stage double suction) • 8” 600 lbs suction flange • 4” 900 lbs discharge flange • Mechanical Seals • Ball radial bearing • Ball thrust bearing • CCW Rotation • Weight 3,447 lbs • Dims (80”L x 37”W x 45” H)
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, CO2 Pipeline Pump, Low NPSH Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3560 RPM
- 1000 GPM
- 2142 TDH
- Stock No: 59440
Used Ingersoll Rand 6RTL-6 pump with the following features: • case material • Multi-stage • impellers • 8" FF suction flange • 6" FF discharge flange • CCW Rotation • Weight 6,680 lbs • Dims 78"Lx38"Wx64"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Snowmaking Pump, Amine Pump, Water Pipeline Pump, Production Pump
- 3550 RPM
- 1050 GPM
- 1851 TDH
- Stock No: 59293
Used Union 4X6X14 HHS, API 610, OH2 pump with the following features: • Cast steel case material • Single stage • 12.5” impeller • 6" suction flange • 4" discharge flange • CW Rotation • Weight 2,900 lbs • Dims 42"Lx26"Wx24"H
Applications: Dewatering Pump, Pipeline Filling Pump, Water Transfer Pump, Oil Transfer Pump, Water Pipeline Pump, Charge Pump
- 3550 RPM
- 931 GPM
- 575 TDH
- Stock No: 59283
Used Worthington 6-UX-2, API 610, BB3 pump with the following features: • Carbon steel case material • Multi stage • impeller • 6" 1500# RF suction flange • 6" 1500# RF discharge flange • CW Rotation • Weight • Dims 89"Lx39"Wx63"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Amine Pump, Water Pipeline Pump, Production Pump
- 800 HP
- 3550 RPM
- 1030 GPM
- 2410 TDH
- Stock No: 59172
Used Ingersoll Rand 3x10DATx5, API 610, BB3 pump with the following features: • 317SS case material • 5 stage • impellers • 6" 600# suction flange • 3" 900# discharge flange • CCW Rotation • Weight • Dims 76"Lx35"Wx28"H
Applications: Saltwater Disposal Pump, Dewatering Pump, Boiler Feed Water Pump, Pipeline Filling Pump, Frac Water Supply Pump, Desalination Pump, Amine Pump, Oil & Gas Pipeline Pump, Water Pipeline Pump, Production Pump
- 3620 RPM
- 1075 GPM
- 1932 TDH
- Stock No: 58747
