- {{tag.text}} ×
PLEASE NOTE: Keep an eye out for a verification email (check your junk or spam). When you see the email, be sure the click on the link to verify your email address.
New Surplus single stage centrifugal pump, 14" 300LB suction, 10" 300LB discharge, CA6NM case material. John Crane Mechanical Seals with Plan 32 (external fluid to seal chamber) and 62 (external quench inlet and oultet). Welded stainless seal piping with temperature gages. API 610 BB2 Class Pump Pump weight 7,055 lbs
- 900 HP
- 1791 RPM
- 5500 GPM
- 580 TDH
- Stock No: 58435
FOR SALE OR RENT:Used Union QX-300 quintuplex production pump package with the following features: • 5" stroke • 350 HP • #3 steel fluid end • 3" steel plungers • 6" 150# suction connection • 3" 1500# discharge connection • Packaged on skid with 5.77:1 internal gears, capable of up to 274 gpm @ 1980 psi, 375 hp John Deere 6090H diesel engine, rebuilt manual transmission, new 3x4x13 hydraulic charge pump system. • Weight 21,080 lbs • Dims (20' 7" L x 7' 5"W x 9' H)
Applications: Pressure Testing Pump, Well Service Pump, Water Transfer Pump, Descaling Pump
- 350 HP
- 359 RPM
- 274 GPM
- 1980 PSI
- Ratio: 5.7700
- Stock No: 56929
FOR SALE OR RENT: LOW HOUR: Skid mounted 5" stroke triplex pump with #3 steel billet fluid end, integral gears with 5.765:1 ratio, 2 3/4" steel plungers, 4" 150# RF suction, 3" 1500# RTJ discharge, driven by Caterpillar C7 diesel engine rated at 225 HP, rebuilt Eaton transmission, new MCM 3x4-13 hydraulic charge pump system, new suction strainer, new status flow discharge and suction dampeners, plunger lubricator, new shear pin relief valve, new pressure gauges, high discharge shutdown, low suction shutdown, low oil level switches, vibration switch, diesel fuel tank, hydraulic tank, and tool box.
- 200 HP
- 369 RPM
- 142 GPM
- 2104 PSI
- Ratio: 5.7650
- Stock No: 57351
REBUILT Gaso 3968 bare shaft triplex pump with the following features: • 5" stroke • 120 HP • Steel billet fluid end • 2 3/4" steel plungers • Delrin disc valves • 838 packing • New end main bearings, new crank pin bearings • New wrist pin bushings, new wrist pins, new cast iron junk rings, new cast iron lantern rings, new cast iron followers • 4" suction connection • 2" discharge connection • Weight 4,030 lbs • Dims 68"Lx39"Wx24"H
- 120 HP
- 360 RPM
- 139 GPM
- 1325 PSI
- Stock No: 56572
Used gen end only, 2000kw, 2500kVA, 12,740/7200v gen end, 500 hours since new Dims 101"Lx84"Wx64"H
- 2876 HP
- 1800 RPM
- 2000 KW
- 12740 Volts
- Stock No: 58499
New Surplus 1500hp radiator assembly
- 1500 HP
- Stock No: 56235
Unused Vertical turbine cast iron pump bowls. 3 stage, Appear to be new or rebuilt. Built 8-30-85. Casting No. JP-4457 weight 1,160 lbs dims 91"L x 20"W x 20"H
- 1770 RPM
- 4000 GPM
- 400 TDH
- Stock No: 56540
New model 911-085072-121, 8" #300 check valve, rated 720 psig mop, body-steel WCB/WCC, trim 18-8SMO 18-8SMO, class III,
- 720 PSI
- Stock No: 56420
New surplus, 3 screw pump capable of 36.2gpm @ 25 psi with viscosity of 33 @ 3500rpm, or 39.3gpm @ 150psi with viscosity of 5000 @ 3500rpm.
- 3500 RPM
- 39 GPM
- 150 PSI
- Stock No: 56642
New Foote Jones DHC-1-105 parallel shaft gearbox with following features: • 14.8 HP Service Rating • 14.8 HP Catalogue Rating • 28:1 Ratio • 1750 Input Speed • 62.5 Output Speed • Weight • Dims
- 14.8 HP
- 1750/62.5 RPM
- Ratio: 28.0000
- Stock No: 56708
New API 53B Seal Plan system Cooling water Inlet Press: 448 kPa (65 psig) Cooling water flow rate: 3.41 cu. Meter/Hr (15 GPM) Oil Supply capacity: 70.8 Lpm (18.7 gpm) Oil Supply Pressure: 1.03 barg (15 psig) Heat dissipated rate: 27573 BTU/Hr (8.08 kw) Lube Oil Temp: 15 - 48.9 C (60-120 Deg F) @ discharge Lube Oil: SIO VG 32
- 18 GPM
- 65 PSI
- Stock No: 59528
New API 53B Seal Plan system Cooling water Inlet Press: 448 kPa (65 psig) Cooling water flow rate: 3.41 cu. Meter/Hr (15 GPM) Oil Supply capacity: 70.8 Lpm (18.7 gpm) Oil Supply Pressure: 1.03 barg (15 psig) Heat dissipated rate: 27573 BTU/Hr (8.08 kw) Lube Oil Temp: 15 - 48.9 C (60-120 Deg F) @ discharge Lube Oil: SIO VG 32
- 18 GPM
- 65 PSI
- Stock No: 59529
New damaged Baldor 700 HP electric motor with following features: • 3580 RPM • 2300/4000 Volts • 155/89 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 32AG5810 Frame • P Type • Weight 8,300 lbs • Dims
- 700 HP
- 3580 RPM
- 3 Phase
- 2300/4000 Volts
- Frame Type: 5810S
- Stock No: 58344
New Baldor 5HP motor with following features: • 1160 RPM • 575 Volts • 3 Phase • 1.15 Service Factor • Encloser: TEFC • Dims (20" L 12" W 15" H)
- 5 HP
- 1160 RPM
- 575 Volts
- Stock No: 60159
New Baldor 5HP motor with following features: • 1160 RPM • 575 Volts • 3 Phase • 1.15 Service Factor • Encloser: TEFC • Dims (20" L 12" W 15" H)
- 5 HP
- 1160 RPM
- 3 Phase
- 575 Volts
- Stock No: 60160
New Baldor 5HP motor with following features: • 1160 RPM • 575 Volts • 3 Phase • 1.15 Service Factor • Encloser: TEFC • Dims (20" L 12" W 15" H)
- 5 HP
- 1160 RPM
- 3 Phase
- 575 Volts
- Stock No: 60161
New Baldor 5HP motor with following features: • 1160 RPM • 575 Volts • 3 Phase • 1.15 Service Factor • Encloser: TEFC • Dims (20" L 12" W 15" H)
- 5 HP
- 1160 RPM
- 3 Phase
- 575 Volts
- Stock No: 60162
New Baldor 25 HP electric motor with following features: • 1765 RPM • 575 Volts • 24 Amps • 3 Phase • 60 Hz • 1.0 Service Factor • 284T Frame • F Type • Weight 435 lbs • Dims
- 25 HP
- 1765 RPM
- 3 Phase
- 575 Volts
- Stock No: 58865
New Baldor 25 HP electric motor with following features: • 1765 RPM • 575 Volts • 24 Amps • 3 Phase • 60 Hz • 1.0 Service Factor • 284T Frame • F Type • Weight 435 lbs • Dims
- 25 HP
- 1765 RPM
- 3 Phase
- 575 Volts
- Stock No: 58866
New Baldor 25 HP electric motor with following features: • 1765 RPM • 575 Volts • 24 Amps • 3 Phase • 60 Hz • 1.0 Service Factor • 284T Frame • F Type • Weight 435 lbs • Dims
- 25 HP
- 1765 RPM
- 3 Phase
- 575 Volts
- Stock No: 58867