Industrial Equipment For Sale | Power Zone
Used Westinghouse 215C64T Inline gearbox with following features: • 10 HP Service Rating • 31.41:1 Ratio • 1750 Input Speed • 56 Output Speed • Weight • Dims
- 10 HP
- 1750/56 RPM
- Ratio: 31.4000
- Stock No: 56043
Used gear drive, 32:1 ratio
- Ratio: 32.0000
- Stock No: 56042
Used Horsburgh Scott LD2800H Parallel gearbox with following features: • 29.6 HP Service Rating • 41.4:1 Ratio • 1150 Input Speed • 28 Output Speed • 1.25 Service Factor • Weight • Dims 44"Lx44"Wx32"H
- 29.6 HP
- 1150/28 RPM
- Ratio: 41.4000
- Stock No: 56041
Used Falk 5342DZ Inline gearbox with following features: • 8 HP Service Rating • 20.8:1 Ratio • 1750 Input Speed • 84 Output Speed • Weight • Dims
- 8 HP
- 1750/84 RPM
- Ratio: 20.8000
- Stock No: 56038
Used Falk 3401RZ-C Inline gearbox with following features: • 3 HP Service Rating • 130:1 Ratio • 1755 Input Speed • 13.5 Output Speed • Weight • Dims
- 3 HP
- 13.5 RPM
- Ratio: 130.0000
- Stock No: 56036
Used Falk 523E210B2 Inline gearbox with following features: • 4.998:1 Ratio • 1150 Input Speed • 230 Output Speed • Weight • Dims
- 1150/230 RPM
- Ratio: 4.9980
- Stock No: 56035
Used worm gear drive, 1.0 service factor, 9.687:1 ratio
- Ratio: 9.6870
- Stock No: 56034
Used Falk 40 RZC Inline gearbox with following features: • 48.8:1 Ratio • 1740 Input Speed • 35 Output Speed • Weight • Dims
- 1740-35 RPM
- Ratio: 48.8000
- Stock No: 56030
Used Falk 7.5562RZ Inline gearbox with following features: • 106:1 Ratio • 1750 Input Speed • 16.5 Output Speed • Weight • Dims
- 1750/16.5 RPM
- Ratio: 106.0000
- Stock No: 56028
Used Falk 32 LU Parallel Shaft gearbox with following features: • 5.0:1 Ratio • 1750 Input Speed • 350 Output Speed • Weight • Dims
- 1750/350 RPM
- Ratio: 5.0000
- Stock No: 56027
Used cast Iron centrifugal mud pump, tag says 8.5" impeller
Applications: Dewatering Pump, Slurry Pump, Pipeline Filling Pump, Water Transfer Pump, Paper Mill Pump, Oil Transfer Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump
- 75 HP
- 3500 RPM
- 700 GPM
- 340 TDH
- Stock No: 56021
Used AC Generator Electric generator end model 124919, 3 phase, 60hz, frame 854, type ATI, fits 18" flywheel, SAE 0 housing, 700kw, 120/208 Volt, 2420 Amp. Canadian General Electric motor.
- 1800 RPM
- 700 KW
- 3 Phase
- 120/208 Volts
- Stock No: 56019
Used Gaso 3673-WS triplex pump fluid end only with the following features: • 6" stroke • 160 HP • Steel billet fluid end • Capable of 176 gpm @ 1410 psi with 3" plungers or 240 gpm @ 1035 psi with 3.5" plungers • 6" 150# ANSI suction connection • 2" 5000# API RTJ discharge connection • Weight • Dims
Applications: Well Service Pump, Water Transfer Pump, Snowmaking Pump, Production Pump
- 160 HP
- 320 RPM
- 240 GPM
- 1035 PSI
- Stock No: 56016
Used Detroit 6V-92NA diesel engine with following features: • 270 HP • 2100 RPM • V-6 Cylinder, 2 cycle • 123.0 mm (4.84 in) Bore • 127.0 mm (5.0 in) Stroke • 9.05 L (552 in3) Displacement • Naturally Aspirated • CCW Rotation (from flywheel end) • Flywheel housing • Air starting system • Weight 2,005 lbs (dry weight, engine only) • Dims (41”L x 39”W x 52” H)
- 270 HP
- 2100 RPM
- Ratio: 17.0000
- Stock No: 56015
Used Ajax T-150 triplex pump power end only with the following features: • 5" stroke • 150 HP • Weight • Dims
Applications: Well Service Pump
- 150 HP
- 360 RPM
- Stock No: 56014
Used aftermarket, plate steel, quintuplex bare power end case only, has been blasted and honed out, inside of case has been primered
Applications: Well Service Pump
- 84 HP
- 500 RPM
- Stock No: 56013
Used generator end only, 800 kw, 3 phase, 60 hz, 346/600 volts, 1800 rpm,963 amps, model 800-480361111, fits SAE 0 housing and 18" Flywheel, came off of a 12V-149 TI engine with 720 hours on it.
- 1800 RPM
- 800 KW
- 3 Phase
- 346/600 Volts
- Stock No: 56008
Used Oilwell A-314 Shaft Mount gearbox with following features: • 125 HP Rating • 3.947:1 Ratio • 1800 Input Speed • 456 Output Speed • Weight • Dims
- 125 HP
- 1800/456 RPM
- Ratio: 3.9470
- Stock No: 56007