Industrial Equipment For Sale | Power Zone
Used inline 6 cylinder natural gas engine, came with rad, Magtronic ignition, Impco 200 carb, Murphy guages, SBM # 85213
- 160 HP
- 1800 RPM
- Stock No: 50874
Used Falk 7.523F210A-4 Inline gearbox with following features: • 7.5 HP Service Rating • 7.454:1 Ratio • 230 Input Speed • 2.0 Service Factor • Weight • Dims
- 7.5 HP
- 230 RPM
- Ratio: 7.4540
- Stock No: 51202
Used Union TD-50 triplex production pump with the following features: • 3" stroke • 60 HP • Steel billet fluid end • 1 7/8" plungers • 3" suction connection • 2" discharge connection • Weight • Dims
Applications: Well Service Pump, Water Transfer Pump, Production Pump
- 60 HP
- 523 RPM
- 56 GPM
- 1100 PSI
- Stock No: 50829
Used Oilwell-Witte 98-RC Pumpjack engine with following features: • 9 HP • 1200 RPM • 1 Cylinder, 4 stroke • 127.0 mm (5.0 in) Bore • 127.0 mm (5.0 in) Stroke • 1.60 L (98 in3) Displacement • Naturally Aspirated • CCW Rotation (from flywheel end) • Weight 710 lbs (dry weight, engine only) • Dims
- 9 HP
- 1200 RPM
- Stock No: 50989
Used Wheatley 2170 duplex production pump with the following features: • 10" stroke • 132 HP • Ductile iron fluid end • 6" Swabs & Liners • Stem guided rubber-insert valves • 6" ASA 150# suction connection • 4" ASA 400# discharge connection • 5.64 gear ratio • Weight 7,150 lbs • Dims 103"Lx45"Wx41"H
Applications: Mud Pump, Oil Transfer Pump, Oil & Gas Pipeline Pump, Production Pump
- 132 HP
- 90 RPM
- 560 GPM
- 637 PSI
- Ratio: 5.6400
- Stock No: 50972
Used Louis Allis 250 HP electric motor with following features: • 3565 RPM • 460 Volts • 300 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • 447TS Frame • GJX Type • Weight • Dims
- 250 HP
- 3565 RPM
- 3 Phase
- 460 Volts
- Frame Type: 447TS
- Stock No: 50889
Used power end with bad crank, same power end as 36-P & 46-P
Applications: Pressure Testing Pump, Well Service Pump, Water Transfer Pump
- 160 HP
- 320 RPM
- 99 GPM
- 5650 PSI
- Stock No: 50773
Used pump on skid, no EM, 3'' discharge on top, 4'' suction on back, mechanical seals, capable of 325 gpm @ 860 rpm
Applications: High Viscosity Pump
- 30 HP
- 860 RPM
- 325 GPM
- Stock No: 50719
Horizontal parallel shaft tear drop shaped
- 1785/520 RPM
- Ratio: 3.4300
- Stock No: 50720
Used General Electric GM7NC539JS1UA00M01 Inline gearbox with following features: • 8 HP Service Rating • 10.99:1 Ratio • 1750 Input Speed • 159 Output Speed • 1.0 Service Factor • Weight • Dims
- 8 HP
- 1750/159 RPM
- Ratio: 10.9900
- Stock No: 50707
Gear reducer, with electric motor
- 1750/260 RPM
- Ratio: 6.7400
- Stock No: 50692
Center mount centrifugal pump
Applications: Dewatering Pump
- Stock No: 50706
Used Pacific 3 JOTB, API 610,BB3 pump with the following features: • Carbon steel case material • 4 stage • 4” 600# RTJ suction flange • 3” 600# RTJ discharge flange • CCW Rotation • Weight 1,800 lbs • Base weight 775 lbs • Dims pump 55"Lx22"Wx21"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Oil Transfer Pump, CO2 Pipeline Pump, Oil & Gas Pipeline Pump, Production Pump
- 3550 RPM
- 360 GPM
- 918 TDH
- Stock No: 50681
Used Pacific 3JHTB Centrifugal pump with the following features: • case material • 3 stage • impeller • 6" 300# RF suction flange • 3" 300# RF discharge flange • CCW rotation • weight • Dims 65"Lx28"Wx24"H
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Oil Transfer Pump, Amine Pump, Oil & Gas Pipeline Pump, Production Pump
- 3550 RPM
- 380 GPM
- 1260 TDH
- Stock No: 50685
Used Pacific JBTB, API 610,BB3 pump with the following features: • case material • Multi stage • suction flange • discharge flange • CCW Rotation • Weight • Dims pump
Applications: Dewatering Pump, Boiler Feed Water Pump, Water Transfer Pump, Oil Transfer Pump, Production Pump
- 3550 RPM
- 150 GPM
- 915 TDH
- Stock No: 50676
Pump pedestals for 6x8x11 5-stage Bingham pumps 17 1/2" tall x 16" center to center wide
- Stock No: 50710
Pump pedestals for Bingham pumps 15 3/4" tall X 16" center to center on holes
- Stock No: 50711