Industrial Equipment For Sale | Power Zone
Used pressure vessel on base, max pressure 125 psi upright 1990
- 125 PSI
- Stock No: 52479
Used upright air compressor on skid with electric motor mount and bottom half of belt guard and cracked heat exchanger
- 130 PSI
- Stock No: 52434
Used upright air compressor on skid with electric motor mount and bottom half of belt guard.
- Stock No: 52443
Used table saw, electric motor, 20in. Blade, piece cracked out of table top
- Stock No: 52444
On casters with foot that can be set down to keep machine stationary
- Stock No: 52446
Used Falk 405A Parallel Shaft gearbox with following features: • 450 HP Service Rating • 4.062:1 Ratio • 1000 Input Speed • 246 Output Speed • 1.94 Service Factor • Weight 2,002 lbs • Dims 50"Lx43"Wx28"H
- 450 HP
- 1000/246 RPM
- Ratio: 4.0620
- 1 Phase
- 240 Volts
- Stock No: 52393
Frame serial number L-62902, cylinder 100PSI serial number L-80065 came with Knight 1000 WP scrubber Date 1-2-64 Disler 3-SV cooler serial number 4012 Date 7-63
- 100 PSI
- Stock No: 52391
Packaged unit on skid with Waukesha F-554GU engine. On a concrete-filled sub-skid. Heat exchanger, single stage.
- 85 to 360 RPM
- Stock No: 52374
Used bare compressor, 150PSI intake, 325PSI discharge, 327RPM, on skid with low cooler, Murphy panel
- 327 RPM
- 325 PSI
- Stock No: 52383
Used inline 6 cylinder natural gas engine, No tag, oil cooler is high with center water entry, Altronic V, clutch, Impco 200 on skid with Worthington 6x11 serial number L-82544-T dims engine only: 99" L x 45" W x 85" H
- 248 HP
- 1800 RPM
- Stock No: 52387
Casting #140420, open exhaust, Alt V, drive plate/pillow block
- 70 HP
- 1800 RPM
- Stock No: 52373
Gas compressor rated at 1250psi, comes with Waukesha F-817 serial number 318107
- 1250 PSI
- Stock No: 52375
Gas compressor rated at 1000 PSI, with Altronic EPC-100 air fuel ratio controller, Murphy panel, on skid with Waukesha F1197 serial number 149148 Skid Dims 194"Lx102"Wx104"H
- 1000 PSI
- Stock No: 52386
Used natural gas engine, 5 1/4 x 5 1/4, came with Twin Disc C110HP4 clutch
- 12 HP
- 1200 RPM
- Stock No: 52344
Used duplex steam pump
- Stock No: 52332
Used Fairbanks Morse 118 Pumpjack Engine with following features: • 7 HP • 350/700 RPM • 1 Cylinder, 4 stroke • 127.0 mm (5.0 in) Bore • 152.4 mm (6.0 in) Stroke • Weight 780 lbs • Dims 38"Lx20"Wx43"H
- 7 HP
- 350/700 RPM
- Stock No: 52310
Used Fairbanks Morse 118 Pumpjack Engine with following features: • 7 HP • 350/700 RPM • 1 Cylinder, 4 stroke • 127.0 mm (5.0 in) Bore • 152.4 mm (6.0 in) Stroke • Weight 780 lbs • Dims 38"Lx20"Wx43"H
- 7 HP
- 350/700 RPM
- Stock No: 52307
Used Ajax 7 1/4x8 EA-30 Pumpjack Engine with following features: • 30 HP • 350-650 RPM • 1 Cylinder, 4 stroke • 184 mm (7.25 in) Bore • 203 mm (10 in) Stroke • 5.41 L (330 in3) Displacement • Weight 2,950 (dry weight, engine only) • Dims 72"Lx46"Wx36"H
- 30 HP
- 350-650 RPM
- Stock No: 52282
Used Ajax 7 1/4x8 EA-30 Pumpjack Engine with following features: • 30 HP • 350-650 RPM • 1 Cylinder, 4 stroke • 184 mm (7.25 in) Bore • 203 mm (10 in) Stroke • 5.41 L (330 in3) Displacement • Weight 2,950 (dry weight, engine only) • Dims 72"Lx36"Wx55"H
- 30 HP
- 350-650 RPM
- Stock No: 52281
Used Gardner Denver PA-8 triplex production pump fluid end only with the following features: • 8" stroke • 200 HP • High pressure steel billet fluid end • suction connection • discharge connection • Weight • Dims
Applications: Well Service Pump, Water Transfer Pump, Production Pump
- 200 HP
- 185 RPM
- 136 GPM
- 2140 PSI
- Stock No: 52275