Models For Sale

Rebuilt Caterpillar 3612 diesel engine radiator through flywheel with following features: • 4720 HP • 900 RPM • V12 Cylinder, 4 stroke • 280.0 mm (11 in) Bore • 300.0 mm (11.8 in) Stroke • 221.7 L (13527 in3) Displacement • Turbocharged (air to air aftercooled) Aspiration • CCW Rotation (from flywheel end) • Flywheel housing • Electric starting system • Weight 55,300 lbs (dry weight, engine only) • Dims (180”L x 67”W x 127” H)

<

1 of 39

>

• 4720 HP
• 900 RPM
• Stock No: 58262

FOR SALE OR RENT: Rebuilt 4 stage horizontal split case centrifugal pump with 13” impellers, 10 inch ANSI 600# suction connection with suction Strainer and Mag flow meter with pressure gauges, 8 inch ANSI 600# discharge connection, packaged with good used MTU 12V-4000 diesel engine rated 1875 HP at 1900 RPM, with pneumatic clutch, and Cotta G01915E-1 gear increaser with 1.89:1 ratio. Package has PLC touch screen with engine controls integrated in same panel. The following transmitters send data to the PLC: flow meter rates, low suction pressure, high discharge pressure, pump bearing temperature, gear box oil temperature, gear box oil pressure, vibration, and all engine controls and ECM info is sent to engine control screen. Engine is mounted with vibration isolators and pump is hard mounted to help eliminate vibration and harmonic issues.

<

1 of 15

>

• 3550 RPM
• 2410 GPM
• 1015 PSI
• 2343 TDH
• Stock No: 57293

FOR SALE OR RENT: Rebuilt NOV 543Q-7XL quintuplex production pump, last used in water pipeline service with the following features: • 7.125" stroke • Duplex Stainless Steel fluid end • 5.75” Tungsten Carbide plungers • Spherical valves • 10" ANSI 150# FF suction connection • 4" ANSI 600# FF discharge connection • Weight: 9,648 lbs • Dims (72"L x 62"W x 40" H)

<

1 of 12

>

• 543 HP
• 280 RPM
• 1121 GPM
• 747 PSI
• Stock No: 58718

FOR SALE OR RENT: REBUILT: Complete skid mounted 8" stroke triplex pump with aluminum bronze fluid end, 5" steel plungers, 6.86:1 rebuilt gear reducer, rebuilt John Deere 6125 diesel engine, Eaton transmission, new MCM series 250X hydraulic driven charge pump, Hydril discharge dampener, suction stabilizer, plunger lubricator with day tank, shear pin relief valve, fuel tank, and hydraulic tank. Package has engine controls and Siemens PLC, low oil transmitters, oil pressure transmitters, oil pressure gauges, low suction transmitter, high discharge transmitter, and fluid levels for all components.

<

1 of 16

>

• 500 HP
• 260 RPM
• 530 GPM
• 1455 PSI
• Ratio: 6.8600
• Stock No: 58291

FOR SALE OR RENT:Used Union QX-300 quintuplex production pump package with the following features: • 5" stroke • 350 HP • #3 steel fluid end • 3" steel plungers • 6" 150# suction connection • 3" 1500# discharge connection • Packaged on skid with 5.77:1 internal gears, capable of up to 274 gpm @ 1980 psi, 375 hp John Deere 6090H diesel engine, rebuilt manual transmission, new 3x4x13 hydraulic charge pump system. • Weight 21,080 lbs • Dims (20' 7" L x 7' 5"W x 9' H)

<

1 of 34

>

• 350 HP
• 359 RPM
• 274 GPM
• 1980 PSI
• Ratio: 5.7700
• Stock No: 56929

FOR SALE OR RENT: REBUILT Union TX-200 production pump with the following features: • 5" stroke • 200 HP • #2 Stainless Steel fluid end • 1 3/4" plungers • 3" 300# RF suction connection • 2" 2500# RTJ discharge connection • Skid mounted with Caterpillar C-7 engine, rebuilt Eaton transmission and complete hydraulic charge pump assembly. • Weight: 16,800 lbs • Dims 19'6" Long 7'5" Wide 9'3" High

<

1 of 17

>

• 200 HP
• 369 RPM
• 57 GPM
• 4988 PSI
• Ratio: 5.7750
• Stock No: 57588

FOR SALE OR RENT: Low hour National JWS-165-L triplex production pump package with the following features: • 5" stroke • 165 HP • Steel fluid end • 4.5" pistons • 6" 150 # suction connection • 2" 1500# discharge connection • Packaged on skid with 225 hp John Deere diesel engine PE6068HF485Q, gearbox, rebuilt manual transmission, 3x4x13 hydraulic charge pump, on oilfield skid • Last used in geothermal application pumping water approx 8 hrs per day. • Weight 15,940 lbs • Dims (219”L x 89”W x 105” H)

<

1 of 42

>

• 165 HP
• 400 RPM
• 413 GPM
• 1910 PSI
• Stock No: 56744

Good used Gardner Denver PZ-8 triplex production pump with the following features: • 8" stroke • 750 HP • Steel billet fluid end • Pump has alloy steel modular fluid cylinders with 6 1/2" liners • Liner wash system, API 7 Valve pots • Gear reducer, discharge pulsation dampener • suction connection • FF discharge connection • 4.5 gear ratio • Skid mounted triplex mud pump that appears rebuilt • Weight • Dims 130"L x 88"W x 54"H

<

1 of 25

>

• 750 HP
• 165 RPM
• 569 GPM
• 2033 PSI
• Ratio: 4.5000
• Stock No: 58255

Rebuilt Gaso 2652 duplex pump with the following features: • 12" stroke • 250 HP • Steel fluid end • pump will come with choice of piston and liner size as well as valves per application spec. • 8'' 300# ANSI suction connection • 4'' 900# ANSI discharge connection • 5.05 gear ratio • Weight • Dims

<

1 of 12

>

• 250 HP
• 85 RPM
• 702 GPM
• 535 PSI
• Ratio: 5.0500
• Stock No: 58457

REBUILT Oilwell D-338-4 triplex plunger pump with the following features: • 8" stroke • 404 HP • Aluminum bronze fluid end • 3.25" steel plungers • 838 packing • 6" 300 # FF suction connection • 3" 2500 # RTJ discharge connection • Weight • Dims

<

1 of 10

>

• 404 HP
• 240 RPM
• 206 GPM
• 3014 PSI
• Stock No: 53443

Two stage centrifugal pump, 10" suction, 8" discharge, mechanical seals, 13 5/8" steel impellers. Appears rebuilt or new.

<

1 of 24

>

• 3450 RPM
• 3680 GPM
• 1228 TDH
• Stock No: 57402

REBUILT: Union QX-300 quintuplex production pump with the following features: • 5" stroke • 350 HP • #3D stainless steel fluid end • 2 1/2" steel plungers • 6" 150# suction connection • 3" 1500# discharge connection • 4.88:1 internal gears • Weight 10,500 lbs • Dims

<

1 of 3

>

• 350 HP
• 359 RPM
• 191 GPM
• 2714 PSI
• Ratio: 4.8800
• Stock No: 56523

REBUILT Gaso 5885-WS (similar to NOV 350Q-5M and Wheatley Q350-3) quintuplex production pump with the following features: • 5" stroke • 300 HP • Steel billet fluid end • 2 3/4" ceramic plungers, • Delrin Disc valves • 838 packing • 6" RF suction connection • 3" RTJ discharge connection • Weight • Dims

<

1 of 8

>

• 300 HP
• 360 RPM
• 231 GPM
• 2020 PSI
• Stock No: 57895

REBUILT Union QD-200-B quintuplex production pump with the following features: • 4.25" stroke • 240 HP • Stainless steel B fluid end • 2 5/8" tungsten carbide plungers • Stainless steel valves • 838 packing • 4" 2500 lb suction connection • 2 1/2" 2500 lb discharge connection • Weight • Dims

<

1 of 9

>

• 240 HP
• 400 RPM
• 199 GPM
• 1850 PSI
• Stock No: 57129

REBUILT Hansen RVL34 Right Angle gear reducer gearbox with following features: • 1900 HP Service Rating • 1900 HP Catalogue Rating • 16:1 Ratio • 1750 Input Speed • 109 Output Speed • 1.9 Service Factor • Weight • Dims

<

1 of 9

>

• 1900 HP
• 1750/109 RPM
• Ratio: 16.0000
• Stock No: 58553

Rebuilt stainless steel, horizontal split case pump - 5-stage, 5-vane 8.125" stainless steel impellers - Rebuilt pump - Sleeve type radial and Kingsbury thrust bearings -6" 900# suction - 3" 1500# discharge

<

1 of 52

>

• 3560 RPM
• 575 GPM
• 1100 TDH
• Stock No: 55634

FOR SALE OR RENT: Rebuilt Union TX-90 triplex pump, #3 Monel fluid end with 2.875" plungers, disc valves, 8.33:1 internal gears, Cummins 6BT diesel engine, rebuilt Fuller Roadranger RTO11609A manual transmission, control panel, fuel tank, tool box, plunger lubricator, shear relief valve, pressure gauge, suction stabilizer, discharge dampener.

<

1 of 21

>

• 90 HP
• 411 RPM
• 138 GPM
• 1001 PSI
• Ratio: 8.3300
• Stock No: 52203

FOR SALE OR RENT: REBUILT Goulds 3335 HDB-210 - 316 stainless steel Case - 10-stage multi-stage diffuser pump - 6.5" 316 stainless steel impellers - rebuilt 100 hp Reliance electric motor - 3565rpm - 3 phase, 60hz, 460v, 110amps, 1.15 service factor - 405TS frame, P type, TEFC

<

1 of 10

>

• 3550 RPM
• 205 GPM
• 1098 TDH
• Stock No: 56455

Rebuilt Allis Chalmers 4500 HP electric motor with following features: • 3569 RPM • 4160 Volts • 525 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • ODP Enclosure • 4586 Frame • ANW Type • Weight • Dims

<

1 of 16

>

• 4500 HP
• 3569 RPM
• 3 Phase
• 4160 Volts
• Frame Type: 4586
• Stock No: 58238

INSTALLED ON RENTAL: REBUILT: #3 Monel fluid end only complete with stuffing boxes, valves and 2 7/8" plungers, 4" suction and 2" discharge, capable of 159gpm @ 847psi with 3 1/8" plungers or 82gpm @ 1635psi with 2 1/4" plungers

<

1 of 12

>

• 90 HP
• 411 RPM
• 134 GPM
• 1000 PSI
• Stock No: 57000

REBUILT National J-150-LCS triplex production pump with the following features: • 5" stroke • 150 HP • Low pressure aluminum bronze fluid end • 4" plungers • delrin disc valves • 838 packing • 6" 150# F.F. suction connection • 3" 2000# R.J. discharge connection • Weight • Dims

<

1 of 8

>

• 150 HP
• 400 RPM
• 286 GPM
• 700 PSI
• Stock No: 58074

ON RENTAL PACKAGE: REBUILT: Bare quintuplex power end

<

1 of 10

>

• 240 HP
• 400 RPM
• Stock No: 56882

REBUILT Gaso 3968 bare shaft triplex pump with the following features: • 5" stroke • 120 HP • Steel billet fluid end • 2 3/4" steel plungers • Used valve seats with new delrin discs • 838 packing • New conrod bearings • New wrist pins and bushings • 4" suction connection • 2" discharge connection • Weight 4,030 lbs • Dims 68"Lx39"Wx24"H

<

1 of 8

>

• 120 HP
• 360 RPM
• 139 GPM
• 1325 PSI
• Stock No: 56573

REBUILT Gaso 3968 bare shaft triplex pump with the following features: • 5" stroke • 120 HP • Steel billet fluid end • 2 3/4" steel plungers • AR wing guided valves • 838 packing • New end main bearings, new crank pin bearings • New wrist pin bushings, new wrist pins, new cast iron junk rings, new cast iron lantern rings, new cast iron followers • 4" suction connection • 2" discharge connection • Weight 4,030 lbs • Dims 68"Lx39"Wx24"H

<

1 of 9

>

• 120 HP
• 360 RPM
• 139 GPM
• 1325 PSI
• Stock No: 56572

REBUILT Union TX-90 triplex pump fluid end only with the following features: • 4" stroke • 90HP • Cast steel fluid end • 3.5" plungers • 5" 150# RF suction connection • 2.5" 600# RTJ discharge connection • with piping, gauges, relief valve, and dampeners • Weight • Dims

<

1 of 9

>

• 90 HP
• 411 RPM
• 205 GPM
• 676 PSI
• Stock No: 55701

REBUILT: Horizontal split case 6 stage diffuser centrifugal pump, 6" 300 suction, 4" 900 discharge, packing, CCW rotation from coupling side

<

1 of 14

>

• 3800 RPM
• 1135 GPM
• 1850 TDH
• Stock No: 57483

REBUILT: Single stage centrifugal pump with 21" stainless steel impeller, 8" suction, 6" discharge

<

1 of 10

>

• 1780 RPM
• 1750 GPM
• 440 TDH
• Stock No: 55794

Vertical turbine cast iron pump bowls. 3 stage, Appear to be new or rebuilt. Built 8-30-85. Casting No. JP-4457 weight 1,160 lbs dims 91"L x 20"W x 20"H

<

1 of 13

>

• 1770 RPM
• 4000 GPM
• 400 TDH
• Stock No: 56540

REBUILT: ANSI single stage centrifugal pump, cast iron, 9.5" impeller, 6" suction, 4" discharge

<

1 of 7

>

• 1800 RPM
• 700 GPM
• 90 TDH
• Stock No: 55140

Rebuilt Ajax DP-80 Pumpjack engine radiator through flywheel with following features: • 80 HP • 250/400 RPM • 1 Cylinder • 279.4 mm (11.0 in) Bore • 355.6 mm (14.0 in) Stroke • 21.79 L (1330 in3) Displacement • Naturally Aspirated • Electric starting system • Weight • Dims

<

1 of 8

>

• 80 HP
• 250-400 RPM
• Stock No: 56477

Rebuilt Ajax DP-80 Pumpjack engine radiator through flywheel with following features: • 80 HP • 250/400 RPM • 1 Cylinder • 279.4 mm (11.0 in) Bore • 355.6 mm (14.0 in) Stroke • 21.79 L (1330 in3) Displacement • Naturally Aspirated • Electric starting system • Weight • Dims

<

1 of 6

>

• 80 HP
• 250-400 RPM
• Stock No: 56476

Used power end only, needs to be rebuilt

<

1 of 8

>

• 60 HP
• Stock No: 58327

Rebuilt David Brown Radicon A04050 URN-L worm gear reducer gearbox with following features: • 92 HP Service Rating • 92 HP Catalogue Rating • 50:1 Ratio • 1750 Input Speed • 35 Output Speed • Service Factor • Weight 1,811 lbs • Dims

<

1 of 8

>

• 92 HP
• 1750/35 RPM
• Ratio: 50.0000
• Stock No: 57551

Rebuilt transmission, 1250Lbs Ft max tq, 10 speed

<

1 of 5

>

• Ratio: 9.9600
• Stock No: 57255

Rebuilt Eurodrive 1.5 HP electric motor with following features: • 1740 RPM • 330/575 Volts • 3.62/2.08 Amps • 3 Phase • 60 Hz • 1.15 Service Factor • TEFC Enclosure • M1 CE-X Frame • R77DT90S4 Type • Weight 90 lbs • Dims

<

1 of 6

>

• 1.5 HP
• 1740 RPM
• 3 Phase
• 330/575 Volts
• Stock No: 57705

Rebuilt and Tested 1 1/2 x 2 1/2 26 series pressure relief valve, 4500psi set pressure, 300psi back pressure, ASME capacity 261 US G/Min, carbon steel body, chrome alloy spring

<

1 of 9

>

• 4500 PSI
• Stock No: 58770

Rebuilt Gardner Denver TA-3 triplex production pump fluid end only with the following features: • 3" stroke • 60 HP • High pressure aluminum bronze fluid end • 1 1/2" steel plungers • 3 1/2" suction connection • 1 1/4" discharge connection • Weight • Dims

<

1 of 10

>

• 60 HP
• 500 RPM
• 34 GPM
• 2680 PSI
• Stock No: 58589

REBUILT Gardner Denver TEE triplex production pump fluid end only with the following features: • 5" stroke • 165 HP • Aluminum Bronze fluid end • 3 1/4" plungers, 2 new colmonoy 1 used carbide plungers • SS wing guided AR valves • 838 packing • 6" suction flange connection • 3" threaded discharge, connection • Weight • Dims

<

1 of 14

>

• 165 HP
• 350 RPM
• 188 GPM
• 940 PSI
• Stock No: 58100

Rebuilt Gaso 1742 Duplex pump

<

1 of 13

>

• 120 HP
• 85 RPM
• 260 GPM
• 665 PSI
• Stock No: 58759

REBUILT: Gaso 1753 Duplex Pump pump with the following features: • 10" stroke • 120 HP • Cast ductile iron fluid end • Plungers • 6" 150# ANSI suction connection • 4" 600# ANSI discharge connection • 5.846:1 gear ratio • Weight 7,012 lbs • Dims

<

1 of 10

>

• 120 HP
• 85 RPM
• 337 GPM
• 550 PSI
• Ratio: 5.8460
• Stock No: 55725

FOR SALE OR RENT: REBUILT: Gaso 5350-L quintuplex production pump package with the following features: • 3.5" stroke • 126 HP • Aluminium bronze fluid end • 3" plungers • AR valves • 838 packing • 6" NPT suction connection • 2" NPT discharge connection • Packaged on skid with 125 HP Reliance electric motor, 1800 RPM, 460v • Last used in crude oil pipeline service, would be excellent for produced water injection • Weight: 5720 lbs • Dims: 150" L 62" W 45" H

<

1 of 5

>

• 126 HP
• 500 RPM
• 240 GPM
• 725 PSI
• Stock No: 59082

REBUILT Hansen RVL34 Right Angle gear reducer gearbox with following features: • 1900 HP Service Rating • 1900 HP Catalogue Rating • 16:1 Ratio • 1750 Input Speed • 109 Output Speed • 1.9 Service Factor • Weight • Dims

<

1 of 8

>

• 1900 HP
• 1750/109 RPM
• Ratio: 16.0000
• Stock No: 58554

FOR SALE OR RENT: Rebuilt Ingersoll Rand 4x9N 7-stage centrifugal diffuser pump, with 6" 300# suction, 4" 900# discharge, packaged on skid with Dyno tested (760 HP) Detroit 16V-71 Twin Turbo Diesel engine and Cotta SI3E-28 2.03:1 gear increaser.

<

1 of 27

>

• 3570 RPM
• 800 GPM
• 1900 TDH
• Stock No: 57808

REBUILT: 4.25" stroke bare quintuplex power end

<

1 of 7

>

• 240 HP
• 400 RPM
• 65 GPM
• 6000 PSI
• Stock No: 58682

Rebuilt Nuttall 91R54548 parallel shaft gearbox with following features: • 247 HP Service Rating • 247 HP Catalogue Rating • 4.950:1 Ratio • 1750 Input Speed • 354 Output Speed • 2.08 Service Factor • Weight • Dims

<

1 of 7

>

• 247 HP
• 1750/354 RPM
• Ratio: 4.9500
• Stock No: 57022

Rebuilt transmission, with clutch housing

<

1 of 6

>

• Stock No: 53762

Rebuilt Union QD-200 quintuplex pump power end only with the following features: • 4.25" stroke • 240 HP • Weight • Dims

<

1 of 10

>

• 240 HP
• 400 RPM
• 211 GPM
• 10000 PSI
• Stock No: 58676

REBUILT: Crankshaft only

<

1 of 3

>

• 240 HP
• 400 RPM
• Stock No: 56204

Rebuilt Union TX-125 triplex pump fluid end only with the following features: • 5" stroke • 125 HP • #3 steel fluid end • 2 3/4" steel plungers plungers • 4" #300 suction connection • 2 1/2" #1500 discharge connection • Weight • Dims

<

1 of 6

>

• 125 HP
• 303 RPM
• 116 GPM
• 1683 PSI
• Stock No: 58395